Top 9 12 Shark Bite Caps

Product Description

Cap off pipe in seconds with the SharkBite Push-to-Connect 1/2-Inch End Cap. This plumbing fitting caps copper, PEX, CPVC, HDPE, or PE-RT pipe. With no soldering, clamps, or glue required, capping is as simple as inserting a pipe into the fitting deep enough to be sealed by the specially-designed O-ring. Once inserted, the fitting’s stainless steel teeth bite down and grip the pipe. Disassembly is just as easy with the SharkBite disconnect tool. The SharkBite End Cap is designed for potable water and radiant heating applications (including underground or behind-the-wall applications) with no access panels required.

SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. SharkBite fittings are lead-free and meet all requirements for plumbing in California and Vermont. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

SharkBite is a provider of plumbing and water control systems for domestic, commercial, and industrial applications. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves, and PEX pipe, making it the only total plumbing solution from meter to fixture.

From the Manufacturer

SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.

PROCURU Push-Fit Fitting provides super easy, safe, and trouble-free solution to joining pipe of various materials including Copper, PEX, and PVC. No installation tools is necessary: NO solder, NO torch, NO wrench, NO glue! Meets and exceeds the latest plumbing and building codes, PROCURU Push-Fit is specified and recommended by the industry’s leading experts. Pack of 10 per order.

Cap off pipe in seconds with the SharkBite Push-to-Connect 1/2-Inch End Cap. This plumbing fitting caps copper, PEX, CPVC, HDPE, or PE-RT pipe. With no soldering, clamps, or glue required, capping is as simple as inserting a pipe into the fitting deep enough to be sealed by the specially-designed O-ring. Once inserted, the fitting’s stainless steel teeth bite down and grip the pipe. Disassembly is just as easy with the SharkBite disconnect tool. The SharkBite End Cap is designed for potable water and radiant heating applications (including underground or behind-the-wall applications) with no access panels required.

SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. SharkBite fittings are lead-free and meet all requirements for plumbing in California and Vermont. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

SharkBite is a provider of plumbing and water control systems for domestic, commercial, and industrial applications. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves, and PEX pipe, making it the only total plumbing solution from meter to fixture.

“

Dual Compression Angle Stop
The SharkBite double stop angle supply valve controls water flow to household plumbing fixtures and allows two 3/8” outlet supply lines to be attached to a single supply valve. Designed for running two supply lines such as a dishwasher and kitchen faucet or dual vanity sink. The Angle Stop Valve is used where the water pipe enters the room to allow for easy water shut-off of to the end fixture allowing for maintenance and repair without having to turn water off to your entire home.

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.

Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

“

Product Description

SharkBite 1/2″ Disconnect Tongs These easy to use disconnect tongs disconnect SharkBite fittings in hard to reach places where it can be tough to get a clip on the release collar. The stainless steel disconnect tongs are the perfect tool for anyone frequently using SharkBite Push to Connect Plumbing Fittings. This tool Depresses the collar using the force applied by your hand to allow the teeth of the fitting release the fitting from the pipe. CUT. PUSH. DONE.The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue. Connect pipe in seconds with relative ease using any SharkBite Push-To-Connect fitting. The SharkBite plumbing fitting is the easiest way to join copper, CPVC, HDPE, or PEX pipe in any combination. With no soldering, clamps, glue required, it’s as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. Disassembly is fast and easy using the disconnect tongs.

From the Manufacturer

SharkBite U711 Disconnect Tongs 1/2-Inch

CUT. PUSH. DONE. When lower material cost is desired, the SharkBite barb connection system is the best option for connecting PEX tubing in water distribution systems. The PEX/Barb Connection System includes fittings, manifolds, valves, clamp rings, crimp rings and tools. Can be used with either SharkBite Clamp Rings or SharkBite Crimp Rings. The SharkBite Connection System makes any plumbing project fast and easy thanks to unique push-to-connect technology. When you insert a pipe into a SharkBite quick-connect fitting, the fitting’s stainless-steel teeth bite down and grip the pipe, while its special O-ring compresses to create a watertight seal. No soldering, no clamps, no glue. SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for installation in tight spaces. Whether you need to repair a broken pipe or plumb a whole house, SharkBite provides a push-to-connect solution and leak-free results.

SharkBite PVC cap is the most efficient PVC pipe cap due to its push-to-connect design. These PVC pipe plugs make a great pipe plug for stub outs and pressure testing a home or PVC water line as they take no time to cure after installation.

Product Description

Shark Bite push-fit fittings are the fastest, easiest way to join copper, CPVC and PEX in any combination-wet or dry-with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Fittings certified to 200 PSI and 200-DegreeF (93-DegreeC). Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels

From the Manufacturer

Shark Bite push-fit fittings are the fastest, easiest way to join copper, CPVC and PEX in any combination-wet or dry-with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Fittings certified to 200 PSI and 200-DegreeF (93-DegreeC). Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels