Top 10 Arctic Silver Laptop

Thermal Compound for All CoolersEasy to ApplyWith an ideal consistency, the MX-4 is very easy to use, even for beginners. The possibilities for its application and the most effectively way to avoid voids between CPU and cooler we show you in the video.Safe Application:It does not contain any metallic particles so electical conductivity would not be an issue. Unlike silver and copper compound, it ensures that contact with any electrical pins would not result in damage of any sort.High Durability :In contrast to metal and silicon thermal compound, the performance of MX-4 does not compromise over time. Once applied, you do not need to apply it a second time as it will last at least for 8 years. Value for MoneyA high performance thermal compound perfect for system builders, there’s no suprise that the MX-4 exceeds your expectations for its low price tag. Thermal Conductivity 8.5 W/(mK) Viscosity 870 poise Density 2.50 g/cm³ Volume Resistivity 3.8 x 1013 Ω-cm

Robust steel base a heavy steel plate guarantees the ARCTIC breeze standing stable anywhere. With the anti-slip rubber pads The breeze does not leave any marks, even on the most delicate surfaces. – flexible neck – You may Bend or turn its neck into any position or angle you desire to enjoy a refreshing breeze exactly the way you want. – adjustable fan speed – You can adjust the fan speed with the knob on its base. It works with any USB port of your computer or power adapter. – enjoy it wherever you want – its 1.8 M cable ensures it can be placed wherever you want. The ARCTIC breeze will always be a stylish and handy gadget on the desk to cool you down A bit.

Contains 99.9% pure silver: Arctic Silver 5 uses three unique shapes and sizes of pure silver particles to maximize particle-to-particle contact area and thermal transfer.Not Electrically Conductive: Arctic Silver 5 was formulated to conduct heat, not electricity. (While much safer than electrically conductive silver and copper greases, Arctic Silver 5 should be kept away from electrical traces, pins, and leads. While it is not electrically conductive, the compound is very slightly capacitive and could potentially cause problems if it bridges two close-proximity electrical paths.)Absolute Stability: Arctic Silver 5 will not separate, run, migrate, or bleed.Performance: 3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.Coverage Area: The 3.5 gram tube contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates.Important Reminder: Due to the unique shape and sizes of the particles in Arctic Silver 5’s conductive matrix, it will take a up to 200 hours and several thermal cycles to achieve maximum particle to particle thermal conduction and for the heatsink to CPU interface to reach maximum conductivity. On systems measuring actual internal core temperatures via the CPU’s internal diode, the measured temperature will often drop 2C to 5C over this “break-in” period. This break-in will occur during the normal use of the computer as long as the computer is turned off from time to time and the interface is allowed to cool to room temperature. Once the break-in is complete, the computer can be left on if desired.

ARCTIC offers innovative solutions incessantly – changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people’s lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor – a constant our customers rely on.

Thermal compound is necessary to create a reliable transfer of heat from your computer’s processor to its heatsink to keep your CPU from overheating. Arctic Silver 5 thermal compound does this with three unique shapes and sizes of pure silver particles to maximize particle-to-particle contact area and thermal transfer. It’s optimized for use between modern high-power CPUs and high-performance heatsinks or water-cooling solutions. This 12-gram tube contains enough compound to cover at least 50 small CPU cores, or 20 large CPU cores, or 7 to 15 heat plates.

Contains 99.9% pure silver:,Arctic Silver 5 uses three unique shapes and sizes of pure silver particles to maximize particle-to-particle contact area and thermal transfer.,Not Electrically Conductive:,Arctic Silver 5 was formulated to conduct heat not electricity. (While much safer than electrically conductive silver and copper greases Arctic Silver 5 should be kept away from electrical traces pins and leads. While it is not electrically conductive the compound is very slightly capacitive and could potentially cause problems if it bridges two close-proximity electrical paths.),Absolute Stability:,Arctic Silver 5 will not separate run migrate or bleed.,Performance:,3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.,Coverage Area:,The 3.5 gram tube contains enough compound to cover at least 15 to 25 small CPU cores or 6 to 10 large CPU cores or 2 to 5 heat plates.,Important Reminder: ,Due to the unique shape and sizes of the particles in Arctic Silver 5s conductive matrix it will take a up to 200 hours and several thermal cycles to achieve maximum particle to particle thermal conduction and for the heatsink to CPU interface to reach maximum conductivity. On systems measuring actual internal core temperatures via the CPUs internal diode the measured temperature will often drop 2C to 5C over this “break-in” period. This break-in will occur during the normal use of the computer as long as the computer is turned off from time to time and the interface is allowed to cool to room temperature. Once the break-in is complete the computer can be left on if desired.

Brought to you by UR Impressions LLC and made in the United States, UR Impressionswas created for you, to provide a way to express yourself and be you through vinyl art. UR Impressionsbrand decals are die cut and made with a high gloss* polymeric calendered vinyl film that is suited for outdoor or indoor uses. This vinyl film is great for applications requiring flexibility, durability, resistance to sunlight – more durable than a paper sticker and may last up to 6 years outdoors. These decals apply similar to a temporary tattoo and are designed to be installed at temperatures ranging from 50°F/10°C – 90°F/32°C to clean, smooth surfaces: vehicles, boats, motorcycles, scooters, RV’s, ATV’s, surfboards, skateboards, residential or commercial windows, laptops, tablets, computers, interior walls, and much more. When the time comes the decals are removable with the use of a hair-dryer or heat gun, and leave no damaging residue. Any residue left behind can be cleaned using a terry cloth towel with mineral spirits or automotive adhesive remover (we recommend 3M.) However, once removed the decal is not reusable. All decals are packed in 100% recyclable rigid envelopes or cardboard tubes to help minimize our carbon footprint. Application instructions are also provided to guide you with your installation. Have a question, looking for a different color, need a custom size, or a custom design? Drop us a line, we’ll be happy to assist – or check our FAQ and Help pages for more product information, installation tips, and in-depth application instructions. BE confident with your purchase – all UR Impressionsdecals are backed by a 30-day replacement plan (see legal disclaimer for details). Remember, UR Impressionsis here to celebrate you and your uniqueness – so get UR’s today. *Matte finishes may also apply and are noted in description of product.