Finding your suitable readers for nema 17 cooling fan is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for nema 17 cooling fan including detail information and customer reviews. Let’s find out which is your favorite one.
819 reviews analysed
1. Altelix Vented NEMA Enclosure 17x14x6 (11.5" x 9" x 3.2" Inside Space) Polycarbonate + ABS Weatherproof with Cooling Fan, Aluminum Equipment Mounting Plate, Pre-Wired 120 VAC Outlets, 5 Ft Power Cord
Feature
- Durable Commercial Grade Polycarbonate + ABS NEMA Box with Reinforced Hinges, Dual Latches, Tamper-Proof Locking Screw and Provision for Padlock. IP24 Rated
- Dual 3.5″ Vents and Thermostat Controlled Cooling Fan. NEMA Type 3R, 3RX / IP24.
- Inside Space for Equipment Up to 11.5″ x 9″ x 3.2″ Max. Outside Dimensions: 16.5 x 12.5 x 5.3 Inches.
- Plug-and-Play Enclosure. Includes pre-wired 120 VAC outlets and 5 foot 3-prong power cord.
- Ideal for Protecting Wi-Fi Equipment, Security and Surveillance Equipment, Concealment of Electronic Devices, Industrial Automation, Warehouses, Public Areas and More.
Description
The Altelix NP171406VFA1C Vented Polycarbonate + ABS NEMA Weatherproof Enclosure with 120VAC Power and Aluminum Equipment Plate is ideal for protecting equipment from harsh environments and tampering. This enclosure features a gasketed door to protect from dust and water ingress. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. There is also a provision for padlock use. Internal and external electrical ground points are also provided. The enclosure can be wall mounted using the included wall anchors. An optional pole mount kit is also available for installation on poles up to 8 inches in diameter.
PC+ABS Polycarbonate / ABS Blend for Extreme Durability
These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS enclosures are superior to ABS enclosures because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures.
This configuration consists of the PC+ABS NEMA enclosure with hinged lid and a 2.5mm thick finished aluminum equipment mounting plate with two pre-wired 120VAC power outlets and a 5 foot USA power cord is included to power the enclosure, so no additional wiring is required. A ground lug is provided on the side of the enclosure. Knock-outs on two sides of the enclosure are provided for additional wiring. Cable grommets are included with the accessory kit.
Cooling Fan Ventilation
The NP171406VFA1C features dual 3.5″ vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets leaving them available for internal equipment use.
2. Altelix Light Ivory Vented NEMA Enclosure 14x11x5 (9" x 8" x 3.2" Inside Space) Polycarbonate + ABS Weatherproof with Cooling Fan, Pre-Wired 120 VAC Outlets, 5 Foot Power Cord
Feature
- Durable Commercial Grade Light Ivory Polycarbonate + ABS NEMA Box with Reinforced Hinges, Dual Latches, Tamper-Proof Locking Screw and Provision for Padlock. IP24 Rated
- Dual 3″ Vents and Thermostat Controlled Cooling Fan. NEMA Type 3R, 3RX / IP24.
- Inside Space for Equipment Up to 9″ x 8″ x 3.2″ Max. Outside Dimensions: 13.4 x 10.4 x 4.7 Inches.
- Plug-and-Play Enclosure. Includes pre-wired 120 VAC outlets and 5 foot USA 3-prong power cord.
- Ideal for Protecting Wi-Fi Equipment, Security and Surveillance Equipment, Concealment of Electronic Devices, Industrial Automation, Home Automation, Sprinkler / Irrigation Timers, Warehouses, Public Areas and More.
Description
The Altelix NP141105TVFA1C Light Ivory Vent Fan Cooled Polycarbonate + ABS NEMA Weatherproof Enclosure with 120VAC Power and Aluminum Equipment Plate is ideal for protecting equipment from harsh environments and tampering. This enclosure features a fully gasketed door to protect from dust and water ingress. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. There is also a provision for padlock use.
These enclosures are molded out of Light Ivory UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS enclosures are superior to ABS enclosures because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures.
Low Visibility Light Ivory Enclosure
The color of this enclosure makes it ideal for deploying surveillance and security equipment as well as WiFi equipment and building automation control equipment which typically requires low visibility. It can easily blend in with interior spaces such as in office complexes as well as outdoor applications.
Cooling Fan Ventilation
The NP141105TVFA1C features dual 3″ vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets leaving them available for internal equipment use. Rain shrouds on the front door keep rain water from entering the enclosure.
Power
The NP141105TVFA1C features a 2.0mm thick aluminum plate with two 120VAC power outlets. A 5 foot pre-wired power cord is included to power the enclosure, so no additional wiring is required.
Mounting
The enclosure can be wall mounted using the included wall anchors.
3. Altelix 14x12x8 Fiberglass Vented Weatherproof NEMA Enclosure with Cooling Fan, 120 VAC Power Outlets and Power Cord
Feature
- No Electrical Wiring Required. Get your application up and running quickly. This enclosure comes configured for quick installation and features a pre-wired 5 foot Power Cord and (4) Pre-Wired 120VAC Outlets. The power cord can be easily removed for hard-wiring by a qualified installer. Internal & External Grounding Points provided.
- Features two 4″ Vents and a Thermostat Controlled Cooling Fan. The Low Noise High Airflow Fan helps maintain lower internal temperatures by expelling hot air from the enclosure. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C).
- Weatherproof, UV Stable and Corrosion Resistant Fiberglass Reinforced Polyester (FRP) NEMA Box designed for many years of dependable outdoor operation in harsh environments. NEMA Type 3R, 3RX / IP24 rated. Stainless Steel Hinge and Quick Release Latches with Padlock Hasps. The enclosure is also RF transparent for wireless applications, and features a gasketed extended depth door for additional equipment clearance.
- Includes 2mm thick Finished Aluminum Equipment Mounting Plate. Mounting Plate dimensions:10.9 x 12.8 in. (276 x 324 mm). Enclosure Outer dimensions 15.75 x 13.83 x 8.73 Inches (401 x 352 x 222 mm) . Enclosure Inner Dimensions: 13.87 x 11.97 x 8.4 Inches (352 x 304 x 213 mm). Meets UL94-5V.
- Includes sealed Cable Glands and Stainless Steel Mounting Feet. Provides Weatherproof and Vandal Resistant Protection and Concealment for Electronics and Other Equipment. Ideal for rapid deployment.
Description
The Altelix NF141208VFA1C Fan Cooled Vented NEMA Enclosure is ideal for rapid deployment because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet. The aluminum equipment mounting plate features four pre-wired 120VAC power outlets for your equipment.
Plug and Play Power
Get your project up and running quickly and transition to hard-wired later if needed. The power cord can be easily removed, and the quick-connect terminal strip simplifies hard-wiring by a qualified installer.
Fan Cooling with Thermostat Control
This enclosure features two 4″ vents and a thermostat controlled cooling fan which helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). Rain shrouds keep rain water from entering the enclosure while allowing ventilation for installed equipment. The fan is wired internally, leaving all 4 power outlets available for installed equipment.
Extreme Protection Built to Last
This rugged JIC style NEMA box is molded from durable UV stable and corrosion resistant fiberglass reinforced polyester (FRP) with a UL94-5V flame rating. The FRP material is dent-proof, non-conductive and RF transparent for compatibility with wireless equipment. It can be easily drilled and modified by the installer as needed. It features a gasketed door with stainless steel continuous hinge and stainless steel quick release latches with padlock hasps. The generous size of this enclosure and the extended lid accommodate a wide range of equipment.
Cable Glands
The enclosure features two unique PG-16 cable glands with a closed inner seal. When required for use, simply punch a hole through the inner membrane, run your cables and tighten for a water-tight seal.
Mounting
Stainless steel brackets are included for secure wall mounting.
4. Altelix 14x12x8 Fiberglass Vented Weatherproof NEMA Enclosure with Cooling Fan and 120 VAC Power Outlet
Feature
- Fiberglass Reinforced Polyester (FRP) NEMA Box with Deep Lid Design, Dual 4″ Vents and Thermostat Controlled Cooling Fan. Stainless Steel Latches with Padlock Hasps.
- Fully Gasketed Water Resistant and UV-Stable Design. NEMA Type 3R, 3RX / IP24 Rated.
- Low Noise High Airflow Fan helps maintain lower internal temperatures by expelling hot air from enclosure. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C).
- Includes Finished Aluminum Mounting Plate with 2 Surge Protected 120VAC Outlets, Wiring Terminal and Internal & External Grounding Points.
- Professional Installation by Qualified Electrician is Recommended. Outer Dimensions: 15.75 x 13.83 x 8.73 Inches. Inner Dimensions: 13.87 x 11.97 x8.4 Inches. (4) Stainless Steel Mounting Feet Included.
Description
The Altelix NF141208VFA1 Vented Fan Cooled Weatherproof NEMA Industrial Equipment Enclosure with 120VAC Power and Aluminum Equipment Plate is ideal for protecting equipment from harsh environments and tampering. This rugged NEMA box is molded from durable and UV resistant fiberglass reinforced polyester (FRP) with a UL94-5V flame rating. It features a stainless steel continuous door hinge and stainless steel latches with provision for padlocks. The door is fully gasketed making this enclosure suitable for use indoors or outdoors.
Power
This model features a 2.5mm thick finished aluminum plate with four pre-wired 120VAC surge-protected power outlets. A terminal strip and ground lug are provided for simplified wiring on-site. Three cable glands are provided, one for the AC supply along with two for low voltage wiring. The cable glands can be used with cable ranging from 0.100″ to 0.300″ in diameter. In addition the mounting plate features a number of pre-drilled hole patterns for mounting popular wireless access points without any modifications.
Cooling Fan Ventillation
The NB141208VFA1 features dual 4″ gasketed vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures by expelling hot air from the enclosure. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets leaving them available for internal equipment use. Rain shrouds on the front door keep rain water from entering the enclosure, and the internal aluminum mesh filters are removable for cleaning.
Mounting
Four removable stainless steel mounting feet are included so that the enclosure can be securely mounted to a wall or other structure. An optional pole mounting kit (model NMKS-300-08) is also available.
5. Easycargo 4pcs 3D Printer Fan 12V Brushless, Cooler Fan 40mm 12v, Fan 40mm 2 pin, Fan 40mm x 40mm, 40mm Fan for Cooling Extruder Heatsink Makerbot MK7 MK8, 40mm 40x40x10
Feature
- Hypro sleeve fan suitable for Cooling 3D printer Extruder Heatsink.
- Fan dimension 40x40x10mm, Weight 13.5 gr per piece.
- Air flow (5.49 CFM), Speed (6500rpm), Noise level (25.1dBA), Air pressure (2.87AmmAq), Life time (40,000 hours), Working Voltage (10.8-13.2VDC), Start-up Voltage (7VDC), Current (10mA).
- Lead wire: 2-pin-2.5mm connector, length: 150mm/5.6inch
- Fan frame: BLACK PBT (UL94V-0)
- Can be used for for cooling stepper motor driver, 3D printers, NEMA 17, TEC1-12706 and other robotic projects, development boards. Package includes: 4 pieces 40mm Fan 12V DC + 4 Pack 40mm Fan Grill / Guard + Screw Bolts Mounting Kit.
6. Antrader 6pcs Aluminum Chipset Heat Radiator Cooling Fin Heatsink 40mm x 40mm x 11mm Black
Feature
- Aluminum heatsink cooling, Strong heat conductivity and heat dissipation.
- Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.
- Use heatsink adhesive glue to install heatsink . Glue is not included here.
- Overall Size : 40 x 40 x 11mm/ 1.6″ x 1.6″ x 0.43″ (L*W*H)
- Please check the specification table and make sure that the size of the heatsink fits that of your component.
Description
The Best Product to Save Your Time and Money!
Specifications:
Product Name: Heatsink
Material: Aluminium
Color: Black
Overall Size: 40 x 40 x 11mm/ 1.6″ x 1.6″ x 0.43″ (L*W*H)
Weight: 104g
Package Content :
6pcs x Heatsink
QUALITY GUARANTEE: If there is any quality problem, please feel free to contact us. Refund or Replacement for any quality problem.
7. ESUMIC 20PCS 40mm x 40mm x 11mm Golden Aluminum Heatsink Cooling Fin for Cooling MOSFET VRam Regulators VRM Stepper Driver
Feature
- 1. Type: 20 PCS 40mm x 40mm x 11mm Golden Aluminum Heatsink Cooling Fin.
- 2. Aluminum Heatsink Color: Golden
- Easy Installation.
- 3. Heat Sink Size: 40mm x 40mm x 11mm / 1.57″ x 1.57″ x 0.43″(L*W*H)
- 4. 1 Pcs Heatsink Weight: Approx.18g
- 5. Package Content: 20PCS 40mm x 40mm x 11mm Golden Aluminum Heatsink Cooling Fin.
Description
Can be applied for passive cooling of 3D printers, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler, VRM, MOSFET, Regulators, VRAM, IC Chips, Stepper Motor Drivers, Miners, etc.
Specifications:
Material: Anodized Aluminum.
Size: 40 x 40 x 11mm (L*W*H)
Package includes: 20 pieces heatsink.
Note:
Some scratches may be caused in the production process.
8. 40mmx40mmx10mm Black Radiator Aluminum Heatsink Extruded Profile Heat Dissipation Electronic,3D Printer Part (Pack of 4)
Feature
- Heatsink Made of high quality Aluminum, good thermal conductivity
- Extend those component reliable and Service’s life
- Easy to installation
- Maximize surface area Designed in contact with the cooling air
- Used for IC ,Diode,Dynatron ,Electronic ,LED,RAM,CHIP, computer 3D printer part (for example Setpper motor) component heat dissipation, or anywhere you need a efficient heatsink
Description
Product description
Widely use for computer PC chipset, power IC, power electric device, LED light devices, Use heatsink adhesive glue to install heatsink .(Glue is included) Notice: Please check the specification carefully and make sure that the size of the heatsink fits that of your component.
Product Name : 40x40x10mm Heatsink
Material : Aluminium
Color :Black
Overall Size : 40 x 40 x 11mm/ 1.57″ x 1.57″ x 0.43″ (L*W*H)
Thickness of floor: 2.2MM
Tooth thickness: 1.1MM
Teeth spacing: 2MM
Number of teeth: 13 pieces
Packing List
4pcs Heatsink with 3mm adhesive glue(which stick with heatsink)
9. Nxtop 12 Pcs Aluminium 40 x 40 x 11mm Square Heatsink Cooling Cooler Fin Black
Description
40mmx40mx11mm Aluminum Square Shape Heat Diffuse Cooling Fin Heatsink. Use heatsink adhesive glue to install heatsink . Please check the specification table and make sure that the size of the heatsink fits that of your component.
Conclusion
By our suggestions above, we hope that you can found Nema 17 Cooling Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
