687 reviews analysed
1. Senninger Pressure Regulator 25 PSI 3/4 Hose Thread Drip Irrigation Pressure Reducer Low Flow Valve – Landscape Grade High Performance
Feature
- Ideal for installations requiring lower flows such as solid set, drip line, soaker hose and other low pressure agriculture, residential and commercial irrigation.
- This PRLG (Pressure Regulator Landscape Grade) maintains a constant outlet pressure of 25 PSI (1.72 bar) with a flow range between 0.5 – 7 GPM (114 – 1590 L/hr).
- 100% water tested for accuracy. Senninger pressure regulators are built to rigorous quality standards and are known worldwide for their reliable performance.
- Proper use of this low flow water regulator maintains sprinkler or droplet flow, distribution uniformity, and the overall efficiency of an irrigation system. It also helps conserve water and energy and extend sprinkler and drip system life in your garden or nursery. Works with any standard 3/4″ outdoor faucet, hose bib, garden hose, water hose, sprinkler manifold, garden soaker hose or home irrigation system.
- Made in the USA of engineering-grade thermoplastics. This sturdy inline plastic water regulator can be installed above or below ground. No external metal parts for excellent corrosion resistance.
Description
Every system experiences pressure fluctuations resulting in unwanted flow deviations and over or under-watering. In nursery, home & commercial landscape watering systems, pressures can fluctuate when zones cycle on or off or due to elevation changes in the irrigation system. A water pressure regulator works like an automatic valve to limit higher pressure to a desired constant lower pressure. It is important to maintain the correct operating pressure for optimum droplet size and radius of throw. Regulation is also imperative to properly meter application of fertilizers & herbicides through the irrigation system. Despite being an essential part of any drip system, pressure regulators are often not included in drip irrigation kits. Pair with backflow preventer and keep extra handy for irrigation repair, replacement parts, or expansion.
Attributes:
100% water tested for accuracy
Can be installed above or below ground
No external metal parts for excellent corrosion resistance
Maximum flow path resists plugging
Very low hysteresis & friction loss
Preset Operating Pressure: 25 PSI (1.72 bar)
Maximum Inlet Pressure: 105 psi (7.24 bar)
Flow Range: 0.5 – 7 GPM (114 – 1590 L/hr)
Inlet Size: ¾” Female hose thread / Outlet Size: ¾” Male hose thread
Applications: Drip Line, Low Volume, Nursery, Greenhouse, Solid Set, Pivots & Linear Systems
Model #: PRLG-25 / Product #: PRLG253FH3MH
Length: 3.1 inches / Width: 1.6 inches
Note: If you measure PSI of this Pressure Regulator with a Pressure Gauge, please note “End cap” style gauges do not measure accurately because they block flow of water when screwed onto the end of the regulator. The spring inside the regulator only activates when water is actively flowing through it. For accurate results, use a gauge that allows water to flow unblocked through the regulator while measuring.
2. VIVOSUN Hydroponics CO2 Regulator Emitter System with Solenoid Valve Flowmeter for Grow Room Grow Tent Green House Aquarium
Feature
- DURABLE MATERIAL: Long-lasting durable brass components that will function for many years without rusting
- SPECIFICATIONS: 1.58″ high pressure gauge: 0-4000 PSI. Flowmeter: 0-15 scfh. Inlet connection: cga-320
- APPLICATION: Perfect for indoor grow rooms, grow tents, green houses, and hydroponics to enhance the amount of carbon dioxide to the growing environment and speed up growth rates and yields by up to 40%.
- COMPONENTS :A precision regulator, flow gauge, and industrial solenoid valve, 5 meters free plastic dispensing tubing and USA standard 3-prong plug (Hose tail suit for 4.2 mm inside diameter hose. )
- MULTIPLE OPTIONS: This CO2 Regulator will allow you to maintain ideal CO2 levels for optimal growth
3. BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld
Feature
- Brand New BETOOLL Argon / CO2 / Helium regulator and flow meter.
- Flow Meters are more accurate than the flow gauge regulators.
- The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi.
- And this flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators.
- The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube.
Description
100% Brand New.
Color: Gold
Material: Copper
Size: 12cm(L)*7.5cm(W)*16CM(H)
Compare the detail sizes with yours, please allow 1-2MM differs due to manual measurement
Flow Meters are more accurate than the flow gauge regulators. The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi.
The output flow is adjustable from 0- to 25 lpm, and is indicated by a ball which moves up and down in the flow tube, so this flow meter will handle MIG and TIG welding both steel and aluminum. The fitting is a CGA-580 fitting, so it fits all argon, helium, nitrogen, and argon/CO2 mixed gas tanks. This does not fit CO2 cylinders. If you want a CO2 Flowmeter see our auction for those.
A very nice thing about this Flow meter is the outlet will fit both the female 9/16″ x 18 nut or the male 5/8″ x 18 fitting. You can see the adapter in the picture. It comes with a standard 1/4″ barbed fitting. If you have a Miller, Lincoln, or Hobart welder, the gas hose from your machine should screw right in, as they should use the 5/8″ x 18 male nut.
Package Content: 1 x Argon CO2 Flow meter
4. KES Shut Off Valve Brass Shower Head Valve with Handle Lever G1/2 Water Flow Control Valve Regulator Chrome, K1140B-CH
Feature
- BRASS BODY: One-piece Solid Brass body construction provides much higher performance (high heat-resistance and pressure-resistance) and durability than plastic ones. It can serve many years without leakage.
- HIGHLY-RELIABLE CARTRIDGE: Advanced leakproof ceramic cartridge can be operated up to 200 000 times switching cycles.
- WATER FLOW CONTROLLER: Can be used as shut-off valve or water flow control valve.
- UNIVERSAL CONNECTIONS: 1 X G 1/2 female inlet 1 X G 1/2 male outlet standard straight thread connections washer included.
- EASY-TO-OPERATE: Lever handle can be operated easily and smoothly even with wet and slippery hands.
5. Rain Bird HT07525PSI Drip Irrigation 25 PSI Pressure Regulator, 3/4" Female Hose Thread x 3/4" Male Hose Thread
Feature
- Maintains optimum 25 PSI pressure and water flow to Drip lines and emitter devices
- Connects to any 3/4″ male pipe threaded faucet, garden hose or component
- 20 gallon per minute flow through capacity
- Durable, robust design provides reliable operation
- Constructed of highly durable UV and chemical-resistant materials
- To automate your system, add a Rain Bird 1ZEHTMR Hose-End Timer (sold separately)
Description
Product Description
Rain Bird HT07525PSI Drip Irrigation 25 PSI Pressure Regulator, 3/4″ Female Hose Thread x 3/4″ Male Hose Thread. This Drip irrigation pressure regulator connects quickly, and easily to any 3/4” male pipe threaded (MPT) outdoor faucet, garden hose or component. Properly regulates water pressure and flow to a Drip irrigation system; maintaining optimum 25 PSI pressure and water flow to Drip lines and emitter devices. Simply thread into place; take care fitting is fully tightened so rubber gasket can correctly seal assuring leak-proof performance. Operates under constant pressure providing a maximum flow rate of 20 gallons per minute. Constructed of highly durable UV and chemical-resistant materials to assure long life. Rain Bird “The Intelligent Use of Water”
From the Manufacturer
Rain Bird Corporation is a privately held company founded in 1933 during the agricultural boom in California. We’re recognized as the #1 manufacturer and provider of irrigation products and services in the world. With sales offices around the globe; we offer over 4,000 water-saving irrigation products in more than 130 countries. Since the very beginning, Rain Bird has produced and offered the industry’s broadest range of high-quality irrigation products for: farms, golf courses, sports arenas, commercial developments and homes. Over the past 80-years Rain Bird has received more than 450 patents worldwide. Including the first one for irrigation in 1935 for our original impact-drive sprinkler (U.S. Patent #1,997,901) which revolutionized agricultural food-production and ushered in a new era in irrigation worldwide. In 1990 this original impact sprinkler was designated a historic landmark by the American Society of Agricultural Engineers. Our products cover all aspects of irrigation…timers/controllers, pop-up rotary sprinklers, pop-up spray head sprinklers, sprinkler nozzles, irrigation valves, Drip irrigation, drainage and much more. These products have all been chosen and installed worldwide in the largest and most prestigious projects for residential, commercial, agricultural and golf course irrigation. Rain Bird is committed to The Intelligent Use of Water™ with our commitment extending beyond products to education, training and services for the industry and the community. Our legacy is to design and manufacture only products of the highest value and quality. We’re grateful to have received numerous recognition awards from many of our valued partners. Rain Bird “The Intelligent Use of Water”
6. Bunn 36994.0000 Sol-W/Flow Regulator 1Gp Valve Assembly
7. Regulator, Water-Std Flow
Description
Bunn 21993.0005 Regulator, Water-Std Flow. This is a genuine OEM replacement part from Bunn.
8. 4YANG Argon CO2 Regulators Gauges Gas Welding Regulator CGA580 compatible with Miller Lincoln Mig Tig Weld (With Hose)
Description
– ARG/CO2 gauge.
– Argon gauge 0 to 4500PSI.
– Internal safety pressure relief design.
– Plastic adjustment knob for smooth “easy touch” flow settings.
– Ideal for commercial, industrial and laboratory applications.
PACKAGE INCLUDED
1*argon regulator
1*2M hose
Warm Notice: Customer satisfaction is our top pursuit, any questions or any defective product you received, please never hesitate to contact us!
9. Industrial Argon Regulator/Flowmeter Gauges for MIG and TIG Welders – SÜA
Description
Argon / Argon- CO2 Mixtures / Helium Regulator, reduces high pressure from the shield gas cylinder to the specified flow used in TIG and MIG welding processes. Three Outlet Hose Connection Options: 9/16″ Male, 5/8″ Female and Hose Barb
10. AGPTEK Mig/Tig Flow Meter Regulator, CO2 Argon Pressure Reducer Gauge Weld Flowmeter – Full Copper – 10 to 60 cfh
Feature
- AGPTEK, as a professional Flow Meter Regulator Manufacturer, our Argon Flow Meter fits Argon, Co2 and Argon/Co2 fixed, Suitable for most argon tanks,argon hose for miller or Lincoln welders.
- The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube, so this flow-meter will handle MIG and TIG welding both steel and aluminum.
- Economy style flow meter regulator. Single stage piston design.
- Combination of regulator and flow meter as one unit.
- Outlet of the Flowmeter will fit both the female 9/16″ x 18 nut or the male 5/8″ x 18 fitting. It comes with a standard 1/4″ barbed fitting.
Description
AGPTEK HF43U Designed for MIG & TIG applications and provide accurate regulator of gas flow. Dual scale gauge with unbreakable polycarbonate lens for durability.
Preset: 45-50 P.S.I.
Flowmeter Range 10-60 SCFH
inlet connection: CGA580
connection Thread : female UNF9/16,male UNF5/8 with 1/4 ” barbed fitting
Note: We have TWO different sizes thread for sales,HF43(female UNF9/16,male M12X1)HF43U(female UNF9/16,male UNF5/8),Please choose the right size you need before purchasing
Packaging included:
1*AGPTEK Flow Meter Regulator
1*1/4 ” barbed fitting
Conclusion
By our suggestions above, we hope that you can found Bunn Flow Regulator for you.Please don’t forget to share your experience by comment in this post. Thank you!
