The Best Shark Saw Replacement Blade 102312

Product Description

A Great All Around Saw For Every Toolbox. Cuts All Types Of Wood And Does A Wonderful Job In Pvc And Abs Plastic Pipe. 14 Teeth-Per-Inch Allow Smooth, Fast Cuts. If You Are Only Going To Own One Hand Saw This Is The One You Need For All Of Your Jobs. Not For Cutting Metal. Great For Cutting Dimensional Lumber, Thick Plywood, Wallboard And Treated Lumber Of All Sizes. Carves Through Pvc And Abs Pipe Easily And Smoothly., 14 Tpi Blade.

From the Manufacturer

A great all around saw for every toolbox. Cuts all types of wood and does a wonderful job in PVC and ABS plastic pipe. 14 teeth-per-inch allow smooth, fast cuts. If you are only going to own one hand saw this is the one you need for all of your jobs. Not for cutting metal.

Product Description

The Shark 01-2312 12″ Replacement pull blade for 10-2312 12″ 14 TPI carpentry saw is designed to cut all types of wood and does a wonderful job in PVC and ABS plastic pipe.

From the Manufacturer

Replacement blade for 10-2312 12″ General Carpentry Saw. A great all around saw for every toolbox. Cuts all types of wood and does a wonderful job in PVC and ABS plastic pipe. 14 teeth-per-inch allow smooth, fast cuts. If you are only going to own one hand saw this is the one you need for all of your jobs. Not for cutting metal.

This Replacement Blade For The Shark H5414 Trim/Detail Double Edge Saw Is Great For Trim & Detail Work. The 19 & 24 Tpi Are Great For Fast, Smooth Cuts. Blade Is Made Of Flexible Spring Steel. Makes Superior Cuts In Hardwood. Great Jamb Saw, Prized By Both Professionals And Woodworkers.

From the Manufacturer

Shark 10-2204 Dowel/Dovetail/Detail Saw is a very fine cutting saw with very narrow kerf. Designed for tight detailed cuts in all types of wood. Blade flexibility allows flush cutting of dowels and plugs. A great saw for those detail cuts that a regular saw can’t handle. Recommended for all woodworkers.

Product Description

Ideal for all cutting in softwood, hardwood, chip board, or plywood. Thin kerf for fast and smooth cutting action. Computer balanced plate reduces vibration for improved accuracy and better finish.

Amazon.com

The DEWALT DW3106P5 saw blade combination pack contains a 10-inch DW3106 60-tooth fine-finish blade and a DW3103 32-tooth general purpose saw blade. Perfect for miter saw and slide miter saw jobs with softwood, hardwood, chipboard, and plywood, these slim-kerf blades offer quick and even incisions with minimum excess debris. A patent wedge shoulder places additional steel in back of every tip, maximizing strength and precision. Get the cutting action you need at the right price with this heavy-duty combination pack.

Product Description

Diablo next generation 10 in. X 80 tooth non-ferrous/plastics carbide Circular saw blade features new laser-cut Stabilizer vents for precise and clean cuts in non-ferrous metals and plastic materials. The advanced Stabilizer vents feature a permanent filler baked in from top to bottom for absorbing noise and preventing sideways movement, allowing the blade to slice through materials cleanly, quickly and accurately. Constructed with TiCo Hi-Density special-blend carbide, Diablo 10 in. Non-ferrous metals/plastics blade produces precise cuts and provides 5x longer cutting life. The laser cut heat expansion slots allow the blade to expand and contract during use, keeping the cut true and straight. This blade is excellent for cutting plastics, brass, aluminum, copper and fiberglass.

Amazon.com

For a high-impact blade that makes clean cuts in plastics and non-ferrous metals, look no further than the Freud D1080N Diablo 10-Inch Non-Ferrous Metals and Plastics Saw Blade. Thanks to its proprietary TCG (triple-chip grind) teeth, this is your go-to blade for slicing through plastic structures and non-ferrous metals such as copper pipes, aluminum extrusions, and brass plates.

Model # D1080N Diameter 10″ Machine Use Miter/Slide Miter Saw, Table Saw Application Non-Ferrous Metals/Plastics Teeth 80 TCG (Triple-Chip Grind) Arbor 5/8″ Kerf .094″ Hook Angle -5°

Makes Clean, Razor-Sharp Cuts in Plastic and Non-Ferrous Metals
Achieving premium results when working with plastics and non-ferrous metals is all about clean, accurate cuts. The Freud D1080N makes this process easy, fast, and precise. Constructed for making flawless crosscuts, this blade’s proprietary TCG (triple-chip grind) teeth leave a clean, burr-free finish.

Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for jobs that call for slicing through plastic structures and non-ferrous metal pipes, extrusions, and plates. Appropriate application materials include copper, aluminum, brass, and plastic.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1080N’s clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.094-inch kerf between the blade’s 80 TCG (triple-chip grind) teeth is laser cut to provide ease of feed, so you have more control over the blade’s position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade’s laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade’s cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D1080N is designed for durability. The blade’s hardy teeth are protected by Freud’s exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws
The Freud D1080N is a great addition to your workshop because it’s designed with the versatility to fit a variety of table saws and miter saws, including sliding miter saws.

This product is covered by Freud’s Limited Lifetime Warranty.

What’s in the Box
Freud D1080N Diablo 10-Inch Non-Ferrous Metals and Plastics Saw Blade.

See all Product description

Product Description

This blade’s specially designed triple chip tooth design produces extremely smooth, true surfaces for gluing and finish work. There is no need for sanding or jointing after the cut. The ideal working range is from 1/8″ to 1″ thick. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers.

From the Manufacturer

Freud’s new thin kerf glue line rip saw blade. This blade’s specifically designed triple chip tooth produces extremely smooth true surfaces for gluing and finish work. There is no need for sanding or jointing after the cut. The ideal working range is from 1/8-Inch to 1-Inch thick. With this ultimate ripping blade, there is no need for stabilizers. Blade features Freud’s Tico Hi-Density micro grain carbide with Titanium for long life and a flawless finish, Laser-cut anti-vibration Technology reduces noise and extends cutting life, Laser Cut steel blade body for smoother cuts and flatness, and Non-stick Perma-Shield Coating that reduces gumming, rusting, and corrosion for longer life with less wear. The thin kerf blade removes less material than standard carbide blades, thus requiring less horsepower to produce equally good results. 10-Inch by 30t TCG 5/8-Inch arbor. This blade is covered by Freud’s Limited Lifetime Guarantee.

Product Description

Using advanced technology, Freud developed the LU79 thin kerf line of saw blades provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. The combination of Hi-ATB tooth design and anti-vibration slots makes these thin kerf blades the ultimate finish blades. The result is a cut so smooth it eliminates the need for a stabilizer or a scoring blade!

Amazon.com

The 10-inch Freud LU79R010 Thin Kerf Ultimate Plywood and Melamine Saw Blade is a heavy-duty blade that delivers a precise, chip-free finish when cutting through everything from veneered plywood to melamine countertops and hardwood molding. Featuring 80 teeth with TiCo high-density carbide tips and Freud’s Perma-SHIELD coating, which helps reduce heat buildup and friction, this durable thin-kerf blade is built to stay true, delivering accurate cuts over the long haul.

LU79R010 Thin Kerf Ultimate Plywood and Melamine Saw Blade At a Glance: Ideal for melamine, laminates, plywood, and crosscutting hardwood; handles materials 1/4 to 1-5/8 inches thick Heavy-duty plate with laser-cut, anti-vibration slots Tough Perma-SHIELD coating reduces friction and heat buildup Technical Specs: Coating Perma-SHIELD Diameter 10″ Teeth 80 Hi-ATB Arbor 5/8″ Kerf (K) .098 Plate (P) .071

Wall Thickness

Thin Kerf allows for faster feed rate and reduced waste Freud-Made TiCo Carbide specifically designed to cut nonferrous metals extends tooth life

Hi-ATB Teeth offer Versatility and Clean Finishes
This thin-kerf blade’s 80-tooth, high-alternating-top-bevel ( Hi-ATB) configuration features a large number of small teeth that face both left and right–a setup that ensures clean crosscuts and splinter-free finishes, even when working with hard-to-handle materials like laminates. This setup paired with Freud’s anti-vibration technology results in cuts so smooth that they eliminate the need for a stabilizer or a scoring blade.

This blade is designed for optimal performance when cutting materials that are 1/4 to 1-5/8 inches thick, including hard- and softwood, chipboard, plywood, laminates, and melamine. The blade can also handle ripping wood, and it can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a 0.098 kerf.

Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work–a feature that’s especially important when working with plywood or laminates. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use.

High-Density Carbide for Maximum Cutting Performance
This thin-kerf saw blade’s 80 teeth are finished with tips made from Freud’s application-specific TiCo high-density carbide “crosscut blend.” Formulated to help the blade maintain a sharp cutting edge in the face of demanding crosscut applications, this blend is extra hard–due to including more high-density tungsten carbide than other TiCo blends–and it still offers the full mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo.

With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer–saving you time and money.

Perma-SHIELD Coating Reduces Friction and Heat Buildup
Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud’s red Perma-SHIELD–a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.

As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or “pitch” buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud’s limited lifetime warranty.

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud’s full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What’s in the Box
Freud LU79R010 Ultimate Thin Kerf Plywood and Melamine Saw Blade–10-inch diameter, 5/8-inch arbor, 80-tooth design.

See all Product description

Product Description

The Diablo 10in. 50 Tooth Combination Circular Saw Blade is ideal for ripping and crosscutting wood and wood composites, while leaving a smooth finish. This blade is the best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by a large gullet. Diablo’s large gullet provides the chip removal space required while ripping, and the close grouping of teeth with the set provides the smaller bit size required when crosscutting. Features a super-thin laser cut kerf, Perma-SHIELD nonstick coating, tri-metal shock-resistant brazing and more. For use on miter saws and table saws. Arbor Knockout No, Arbor Size in. 5/8, Corrosion Resistant Yes, Teeth qty. 50, Blade Diameter in. 10, Blade Speed RPM 7,000, Blades qty. 1, Tip Type Carbide, Tooth Grind Combination, Anti Stick Rim Yes, Blade Use Wood, wood composite. Super-thin laser cut kerf for fast, durable and clean cuts TiCo hi-density carbide provides a controlled carbide wear that stays sharper longer Perma-SHIELD nonstick coating shields the blade against heat, gumming and corrosion Tri-metal shock-resistant brazing allows carbide tips to withstand extreme impact for maximum durability Hardened steel body for longer life and a sharper cutting edge

Amazon.com

For a multi-purpose blade that makes clean rips and crosscuts in both wood and wood composites, look no further than the Freud D1050X Diablo 10-Inch Combination Saw Blade. This is your go-to tool when one blade is needed for ripping and crosscutting. This blade’s large gullet provides ample space for effective ripping, while its closely-grouped teeth achieve smooth crosscuts. For strong, long-lasting resistance, the blade features a tough steel plate and high-density carbide tips.

Model # D1050X Diameter 10″ Machine Use Miter Saw, Table Saw Application Combination Teeth 50 ATB (Alternate-Top Bevel) Arbor 5/8″ Kerf .098″ Hook Angle 15°

Makes Clean, Razor-Sharp Cuts in Wood and Wood Composites
Achieving premium results when ripping and crosscutting a mix of wood and wood composites is all about clean, accurate cuts. The Freud D1050X makes this process easy, fast, and precise. And its multi-purpose versatility minimizes blade changes between tasks, which ultimately saves you time.

The Freud D1050X’s five blades are separated by large gaps and notched with closely-grouped teeth. This combination design offers you the high tooth count required for clean crosscutting, along with the large chip-removal space required for hassle-free ripping.

Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for those projects that need just one blade to handle both ripping and crosscutting. This blade can be used to cut through wood and wood composites, such as particleboard and medium-density fiberboard (MDF).

Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1050X’s clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade’s 50 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade’s position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade’s laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade’s cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D1050X is designed for durability. The blade’s hardy teeth are protected by Freud’s exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws
The Freud D1050X is a great addition to your workshop because it’s designed with the versatility to fit a variety of miter and table saws.

This product is covered by Freud’s Limited Lifetime Warranty.

What’s in the Box
Freud D1050X Diablo 10-Inch Combination Saw Blade.

See all Product description