We spent many hours on research to finding gas range hose 6 ft, reading product features, product specifications for this guide. For those of you who wish to the best gas range hose 6 ft, you should not miss this article. gas range hose 6 ft coming in a variety of types but also different price range. The following is the top 10 gas range hose 6 ft by our suggestions
787 reviews analysed
1. 72" Flexible Stainless Steel Gas Appliance Line with 1/2" OD 1/2 MIP x 1/2 FIP
Feature
- This is for gas dryers and not for ovens or ranges
- 72″ Flexible Stainless Steel Gas Appliance Line
- 203-3132-72 – 6 Feet Long
- This item is not universal. Make sure you are in need of 1/2 gas piping otherwise this will not fit.
- Inner dimensions of this line are 3/8″. Make to measure before ordering or will not fit.
Description
72″ Flexible Stainless Steel Gas Appliance Line With 1/2″ OD 1/2 MIP x 1/2 FIP. Stainless steel connector 1/2″ OD (3/8″ ID) 1/2 MIP x 1/2 FIP – Yellow Coated.
2. BrassCraft CSSD114R-72 X Gas Appliance Connector
Feature
- 3/8 In. ID (1/2 In. OD) x 72 In. corrugated stainless steel with corrosion resistant coating
- Safety+PLUS Excess Flow Valve helps protect against gas fires and explosions – 3/8 In. Female Flare or 1/2 In. MIP connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% Leak Tested
- Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
- CSA certified. Designed, machined & assembled in the USA
Description
BrassCraft’s 3/8 In. Female Flare (1/2 In. MIP) EFV x 1/2 In. MIP x 72 In. Safety+PLUS Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) with a maximum operating capacity of 49,100 BTU’s. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
3. BRASS CRAFT CSSD54-60 ProCoat Stainless Steel Straight Gas Connector with Fittings, 1/2" x 60" L
Feature
- Manufactured in China
- Easy to use
- Highly durable
- Corrosion Resistant Coating Protects From Exposure To Harsh Cleaning and Plumbing Repair Products
- Stainless Steel Construction
- Ranges, Water Heaters and Cooktops Up To 53,200 Btu
- 100-Percent Leak Tested
- Approved For Lp (propane) and Natural Gas
Description
Product Description
SD Series, 60″, Pro-Coat Epoxy Coated, Stainless Steel, Gas Appliance Connector, 3/8″ I.D. x 1/2″ O.D. Tube, 1/2″ Female Pipe Thread x 1/2″ Male Pipe Thread, Product Comes in Re-Sealable Zip lock Bags, AGA Approved & IAS Design Certified For Indoor/Outdoor Use, Recommended For Forced Air Heaters, Gas Ranges, Furnaces, & Water Heaters.
From the Manufacturer
Brasscraft CSSD54-60 Gas Dryer and Water Heater Flex-Lines .
4. Supplying Demand 203-3132 Dryer Gas Hose With Fittings Compatible With 1/2" MIP x 1/2" FIP Hose Connections (6 Feet)
Feature
- Hose Fittings Are Compatible With 1/2″ MIP and 1/2″ FIP
- Comes in Supplying Demand packaging with help support
- The fittings are half inch. The hose is not. Therefore if needing a larger hose diameter then please contact support.
- This item is not universal. This item is mainly used for dryers. If you are not sure what you need contact us before ordering to avoid delays in your repair.
5. SHINESTAR 15 Foot 3/4inch ID Natural Gas Hose with Quick Connect/Disconnect Fittings for Generator, Construction Heaters and More NG/Propane Appliance
Feature
- ????3/4″ ID Natural Gas Hose Connector with a 3/4″ Male QD Plug X 3/4″ Male Pipe Swivel via Quick-connect Adapter
- Used to connect Natural Gas or Propane appliance to a permanent gas supply via quick disconnect
- Perfect for connecting your generator to natural and LP gas supply, also used for high BTU output outdoor cooking appliances, construction heaters, and standby generators
- The male quick disconnect plug fits into quick disconnect adapter (3/4″ quick connect x 3/4″ female pipe thread). It shuts off the flow when pipe is removed
- Quick disconnect hose assembly. Rubber hose and 100% solid brass fittings, well made and sturdy
Description
???? Main Function
- Convert a Natural Gas or Propane appliance to a permanent gas supply.
- Used for connecting high BTU output outdoor cooking appliances, construction heaters, and standby generators. Check the size of your devices before order.
- Automatically shut off the flow when pipe is removed, via the Quick disconnect adapter.
???? Features
- Length: 15 Foot
- Material：Premium rubber and 100% brass
- Hose I.D: 3/4″
- Hose Connection: 3/4″ Male quick discount plug x 3/4″ Male pipe swivel
- Quick Connector: 3/4″ quick connect x 3/4″ female pipe thread
- Certificate: CSA
- BTU: 275,000 P/HR
- Max Work Pressure: 1/2 PISG(3.45 kPa)
???? Note
– The 100lb cylinder MUST be regulated before the hose is connected to the cylinder.
– Use only in locations where they will not be likely to be subject to excessive temperatures [above 200°F (93.5°C)].
6. SHINESTAR 6 Feet Stainless Propane Hose Assembly- 3/8" Female Flare x 3/8" Female Flare for RV, Gas Grill, Fire Pit, Heater and More, Braided Stainless Steel
Feature
- The braided stainless steel flexible hose for extending the propane tank line on your LP appliance. Needed it to move your gas tank farther away from grill
- Connect an appliance equipped with 3/8″ male flare fitting. This hose has female 3/8″ ends on both sides
- Perfect for use with RV, gas grill, propane heater, stove, fire pit table, propane smoker, and more.ONLY use for low pressure appliances
- Most commonly used to connect an auxiliary tank to a motor home
- 6 feet/72inch durable braided stainless steel hose with high quality solid brass fitting, easy to install
Description
ONLY use for low pressure appliances
1.SHINESTAR Propane hose assembly 72 inches long with a 3/8 inch with female flare fittings on both ends.
2.Perfect for use with RV, gas grill, propane heater, stove, fire pit table, propane smoker, and more. Used to connect existing propane gas line to appliances equipped with the 3/8 inch male flare connection.
3.If your’re trying to extend the hose on your propane line, you can use this in combination with a 3/8 flare to 3/8 flare brass adapter
NOTE:
– Pay attention of the sharp edges when unpackaging and installing, better wear gloves
7. PROCURU 5/8" OD x 72" Gas Flex Line Connector Kit for Stove Range, Furnace WeatherProof Stainless Steel with SafeGuard Coating
Feature
- 5/8″ Outer Diameter x 72″ Length (6 Ft.) Stainless steel gas connector with SafeGuard coating for anti-corrosion and air-tight protection
- (3) Brass fittings included: 1/2″ MIP (tapped 3/8″ FIP) (2 pcs), and 3/4″ MIP (tapped 1/2″ FIP) (1 pc)
- 4-Mil High-density gas PTFE sealant tape 1/2″ x 520″, Installation instructions included
- Designed for stoves, range, furnace, and other natural gas and propane appliances
- 100% leak tested and sealed, CSA certified for indoor and outdoor use for natural, propane, LP, and LP-gas air mixtures
Description
PROCURU Gas Connector is tested and certified by CSA for indoor and outdoor use. Approved for LP or Propane including Natural Gas used in common appliances. 100% leak tested for safe and reliable performance. SafeGuard Coating adds patented layer of protection on Corrugated Stainless Steel Tubing against corrosion and common household cleaning agents.
8. BrassCraft CSSD54-72 P 1/2-Inch FIP x 1/2-Inch MIP x 72-Inch ProCoat Gas Appliance Connector with1/2-Inch OD
Feature
- Manufactured in United States
- Easy to use
- Highly durable
- 1/2 In. OD x 72 In. stainless steel connector w/corrosion resistant coating
- 1/2 In. FIP and 1/2 In. MIP steel gas fittings
- 49,100 BTU max flow capacity. Use with natural or LP (propane) gas
- Temperature rating: -40 to 150 Degrees F. Pressure rating: 1/2 psi maximum
- 100% leak tested. Approved for indoor and outdoor use. CSA certified
Description
Product Description
ProCoat, 1/2″ Female Iron Pipe x 1/2″ Male Iron Pipe x 72″, Stainless Steel Gas Connector, 1/2″ OD x 3/8″ ID, 49,100 BTU, Engineered With Added Safety In Mind, Proprietary Polymer Coating Withstands Prolonged Exposure To Harsh Household Chemicals, UV Rays & Salt, Apply To The Corrugated Stainless Steel Connector Using Advanced Powder Coat Technology, Coating Is Baked Directly Onto The Connector Surface At High Temperatures To Provide A Uniform Coating Over The Entire Length Of The Connector & Is Applied Only After The Connector Has Been 100% Leak Tested, Prior To Nut & Fitting Assembly, Use With Natural & LP Gases, Approved For Indoor & Outdoor, Temperature Rating: -40 Degrees Fahrenheit To 150 Degrees Fahrenheit, Maximum Pressure Rating 1/2 PSI, CSA Certified.
From the Manufacturer
BrassCraft’s 1/2 In. FIP x 1/2 In. MIP x 72 In. ProCoat Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) tube with a maximum operating capacity of 49,100 BTU’s. This ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
9. Flame King (100395-72 72" RV Dual Quick Connect Hose
Feature
- 1/4″ ID Thermo Plastic Hose Assembly including a 1/4″ Model 250 Male Quick Disconnect Plug x 1/4″ Model 250 Female Quick Disconnect
- 72″ Overall Length
- Maximum Pressure Rating – 1/2 PSI
- Temperature Range : -40 degree Fahrenheit to 140 (-40 degree Celsius to 60 Celsius)
- Certification – CSA/CGA 8.3 Used for LP Gas Only
Description
Model 250 Dual Quick Disconnect Plug hose assembly used for connecting a small portable camping appliance such as a grill, heater, or lantern with a Male QD Plug in the inlet to a Female Quick Disconnect permanently attached to the piping system. Allows complete breakdown of the appliance and hose.
10. Highcraft GUHDZD3872B 72 in. Flexible Epoxy Coated Gas Dryer Connector with 1/2” in. O.D. & 1/2” in. MIP x 1/2” in. MIP Fitting, Yellow/Stainless Steel, Excellent Corrosion Resistance
Feature
- Dryer and Water Heater Connector with 1/2″ Outer Diameter
- Yellow/Stainless Steel
- 72″ Long with 1/2″ MIP x 1/2″ MIP Fittings
- Gas Connector is 100% Leak Tested
- Rated Pressure: CSA Certified up to 0.5 psi
- Rated Operating Temperature: -40°Fahrenhiet to 150°Fahrenhiet
- FLEXSHIELD Epoxy Coating Provides Extra Corrosion Protection of Stainless Steel 304
- Suitable for Indoor and Outdoor Stationary Gas Appliances
- CSA Approved and Certified
Description
Flextron 72 Inch Flexible Gas Line Connector features 1/2 Inch Outer Diameter & 3/8 Inch Inner diameter with 1/2 Inch Male Iron Pipe (MIP) x 1/2 Inch Male Iron Pipe (MIP) Fittings. This gas connector is from YC38 series of connectors and is made of uncoated stainless steel. Designed for indoor and outdoor use with Dryer and Water Heater Connectors. It Comes with certified design, Stamp of approval, full-length corrugations, strength, and flexibility, flared end adaptors. This connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair, and masonry products as well as UV rays and salt. The coating is applied only after the connector has been 100% leak tested to provide a complete corrosion resistance. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The connector can handle external temperatures of 800 Fahrenheit.
Specifications:
Conclusion
By our suggestions above, we hope that you can found Gas Range Hose 6 Ft for you.Please don’t forget to share your experience by comment in this post. Thank you!
