Nowadays, there are so many products of amprobe 600ck wide range converter in the market and you are wondering to choose a best one.You have searched for amprobe 600ck wide range converter in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings amprobe 600ck wide range converter which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
960 reviews analysed
1. Amprobe INSP-3 Wiring Inspection Tester
Feature
- Circuit tester for measuring, voltage, ground impedance, and voltage drop under load to verify building wiring compliance to code
- Digital tester with constant 10, 15, or 20A simulation regardless of line voltage
- Tests GFCI and AFCI protected circuits
- Compatible with standard 95 to 120V AC circuits
- Safety rated to European Standard 61010-1 Category II 120V
- Testing efficiency-relevant test data voltage, voltage drop, hot and neutral voltage drop, voltage with load
- Verifies if wiring is tested for load carrying ability that it meets electrical code recommendations for voltage drop under load
- Incorrect wiring, undersized wiring, faulty GFCI, faulty or incorrectly wired AFCI
- Measure fault currents
- Tests GFCI and AFCI operations
- Testing efficiency-relevant test data voltage, voltage drop, hot and neutral voltage drop, voltage with load
- Verifies if wiring is tested for load carrying ability that it meets electrical code recommendations for voltage drop under load
- Incorrect wiring, undersized wiring, faulty GFCI, faulty or incorrectly wired AFCI
- Measure fault currents
- Tests GFCI and AFCI operations
2. Amprobe PK-110 Electrical Test Kit with Voltage Probe
Feature
- Residential electrical test kit includes AM-420 Digital Multimeter, VP-1000 Non-Contact Voltage Probe, ST-102B Socket Tester with GFCI and all required batteries
- Kit contains tools to measure voltage up to 250V AC/DC, DC current and resistance, and battery tests
- Check for presence of voltage in receptacles, switches, extension cords and light fixtures
- Verify proper wiring of GFCI (ground fault circuit interrupter) and standard US and Canadian wall outlets with a simple push of a button
- CSA listed for safety
Description
Amprobe products range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. All Amprobe tools undergo rigorous testing to ensure full compliance with the latest IEC and CE safety regulations in Fluke Safety labs for quality and safety you can trust.
3. Amprobe BT-120 Circuit Breaker Tracer
Feature
- Identifies circuit breakers on energized 120V electrical systems
- Receiver always finds the right breaker – automatic sensitivity adjustment removes ambiguity from the search by indicating the correct breaker with light and sound
- The red LED indicator on the transmitter verifies that the receptacle is energized before receptacle or wiring maintenance
- Compatible with standard 90 to 120V AC 50/60Hz breaker system
- UL listed and complies with European Standard EN61010-1: 2001, Category II 120V
4. Amprobe BAT-200 Battery Tester,Compact
Description
The BAT-200 Battery Tester indicates the amount of charge remaining in standard and rechargeable batteries. The analog display needle moves on a color-coded, calibrated scale to quickly identify ‘good’ (green), ‘low’ (yellow), and ‘replace/recharge’ (red) battery status.
5. Amprobe BAT-250 Battery Tester
Description
Amprobe products range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. All Amprobe tools undergo rigorous testing to ensure full compliance with the latest IEC and CE safety regulations in Fluke Safety labs for quality and safety you can trust.
6. Amprobe AM-570 Industrial Digital Multimeter with True-RMS
Description
Amprobe products range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. All Amprobe tools undergo rigorous testing to ensure full compliance with the latest IEC and CE safety regulations in Fluke Safety labs for quality and safety you can trust.
7. Amprobe RS-3 PRO CAT IV 300A Analog Clamp Meter
Feature
- Analog multimeter has a broader operating temperature range than digital multimeters and can be used outdoors
- Analog clamp meter measures alternating current (AC) to 600 amp, RMS AC voltage to 600 volts (V), and resistance to 1,000 ohms
- Transformer clamp with 1.64″ (41 mm) jaw opening measures current without interrupting or touching the circuit
- Needle lock secures the needle in place to protect it from damage during transport and holds the needle at a reading, even after the meter is disconnected
- Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category IV installations up to 600V
- Measures AC current up to 300A
- Voltage up to 600V AC
- Works in temperatures from 5-DegreeF to 122-Degree F
- Operates on 50 and 60 Hz frequency
- Easy to use rotary scale
Description
The Amprobe RS-3 Pro analog clamp meter is an average-sensing, manual-ranging multimeter for measuring current, voltage, and resistance in electrical testing and heating, ventilation, and air-conditioning (HVAC) applications and in environments where very hot or very cold temperatures might interfere with the performance of a digital meter. This analog meter displays measurements with a needle that moves on a calibrated scale. It has a broader operating temperature range than digital multimeters and can be used outdoors. It has a clamp that measures alternating current (AC) to 600 amp, and it comes with detachable test leads that measure AC voltage to 600 volts (V) and resistance to 1,000 ohms. The clamp has two jaws that close around an electrical conductor up to 1.64″ (41 mm) in diameter to measure current without touching or interrupting the circuit. The needle lock secures the needle in place to protect it from damage during transport and to hold it at a reading, even after the meter is disconnected. The resistance measurement also tests for continuity and confirms that the circuit conducts electricity. A finger guard on the body of the meter helps protect fingers from shock.
This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. It is a manual-ranging meter and requires that the operator choose the appropriate operating range. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category IV installations up to 600V, which covers measurements at the source of the low-voltage supply, such as electricity meters and overcurrent protection devices. The meter comes with a soft vinyl carrying case. The meter does not require batteries for measuring current or voltage.
Specifications
| Maximum alternating current (AC) input | 600 amp |
| Maximum AC voltage input | 600 volt (V) |
| Maximum resistance detected | 1,000 ohms |
| Power supply | 1.5V ANSI/NEDA-24A or IEC LR03 AAA battery (one, installed, for resistance measurement) |
| Fuse | 0.5 amp/1,000V fast-blow fuse (installed) |
| Standards met and certifications | European Normal (EN); International Electrotechnical Commission (IEC) and EN safety standard 61010-1; European Conformity (CE); Underwriters Laboratories; Australia N10140 |
| Weight | 1 lb./445 g |
| Meter dimensions | 9.5 x 4.0 x 1.6 inches/243 x 102 x 41 mm (H x W x D) |
H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Clamp meters (also called clamp-on meters) measure electrical current without cutting through wires or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp meters diagnose problems in electrical equipment, wiring, and power supplies. The meter’s current clamp has two jaws that fit around a conductor to take measurements. All clamp meters test for current. Some come with test leads and inputs for measuring voltage, capacitance, and resistance. They display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages determine meter choice. Safety ratings are based on the International Electrotechnical Commission’s (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.
Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA.
What’s in the Box?
- RS-3 Pro analog clamp multimeter
- (1) Test lead set
- (1) 1.5V AAA battery (installed)
- (1) 0.5 amp/1,000V fast-blow fuse (installed
- Soft vinyl carrying case
- Instructions
Conclusion
By our suggestions above, we hope that you can found Amprobe 600Ck Wide Range Converter for you.Please don’t forget to share your experience by comment in this post. Thank you!
