941 reviews analysed
1. OHLPRO Car Tablet Mount Holder,Dash Tablet Holder for Car Windshield Dashboard Universal 360 Degree Rotation for iPad Mini 4/3/2/1Samsung Galaxy Size7/8/9.7/10.5 inch TPU Suction Cup Viscosity Mount
Feature
- TABLET CAR MOUNT :can be safely used dashboard or windshield compatibility with 7-10.5 size tablets.Universal for Samsung Galaxy Tab 4 3/ iPad Mini/iPad Air 2 /iPad Air/iPad 4/iPad 3/ iPad 2 iPad Pro,PADs or other tablets firmly ipad car mount.
- MULTI-ANGLE ADJUSTMENT：360degree rotating tablet holder for car make your phone to rotate in any position
- the sturdy arm can be 190 degree adjustment, driving without blocking your sight
- when on the bumpy roads corners,the device also can be firmly.
- MATERIAL CHARACTERISTICS: durable with steel POM plastic material,temperature-resistant TPU sucker,plus one layer of gel integral ,can ensure firm adsorption on the automobile dashboard windshield(Note: It is not suitable for leather surface adsorption)
- When driving for traveling outside with your family,safe and secure tablet holder stand safely in front of the car.Powerful gel adheres to most dashboard and windshield
- the bottom is easy to clean with water and ordinary air dry ipad holder for car.
- WARRANTY：Whenever there is any quality problem you meet from our product, we will take responsibility and solve it to your satisfaction immediately.
2. IPOW Anti-Slip Silicone Car Phone Dashboard Pad Mat,Hands-Free Cell Phone Holder for Car/Home/Office Compatible with iPhone 7 7P 6s 6 X XS 8 8P 5S,Galaxy S8 S7 S6 S5, Google Nexus
Feature
- 【Upgraded More Stable Version Since Oct. 28,2018】Added 4 Sticky Gel Footprints based on old anti-slip mat design,this holder will be more stable. Please tear off the protect films of the sticky gel footprints to use.
- 【Hassle-free to Move and Adjust】Put it quickly in front of car steering wheel,on car dash/console/seat/home/office, place your phone in then adjust it in all directions to the best location in your eye level.
- 【Holds Different Phones】Two pairs of rubber holders compatible with phones’ thickness within 14mm, the slide ways for the rubber “legs” are inserted with sheet metals to offer a strong suppport so your phones stay more snugly.
- 【Phones’s Title Angle Adjustable】Use 2 C-shaped clips on the mounting holders, move them up and down to adjust the tilt angle of your phone.
- 【Convennient Simple Design】No long arm, magnets, suction cups, clamps, folds flat for easy storage and lightweight to carry and travel.
3. Magnetic Phone Tablet Holder for Car,OHLPRO Dash Windshield Dashboard Mount,360 Degree Rotating Super Strong Magnet TPU Suction Viscosity for iPhone iPad Size 4"- 10" Tablet Mount
Feature
- 1）PRODUCTS USING FEATURES: the perfect the universal holders for mobile phones and tablet PCs is absolutely rare on the market.Suction gels are especially suitable for windshields and not flat dashboard, effectively protect driving safety.
- 2）COMPATIBILITY FEATURES：Bigger six powerful magnets Universal compatibility with 4-10-inch screen size phone tablets. Including Apple iPhone, Blackberry, Samsung, Motorola, HTC, Droid and Nokia. iPad Pro 10 inches, iPad Pro 9.7, iPad Air 4, iPad Air 3, Air 2, iPad Mini, Samsung Tablet.
- 3)MATERIAL CHARACTERISTICS: durable comparable with steel, POM plastic material,temperature-resistant TPU sucker,plus one layer of gel integral molding,can ensure firm adsorption on the automobile dashboard windshield(Note: It is not suitable for leather surface adsorption)
- 4)VERSATILE FEATURES: 360-degree swivel ball to rotate your phone tablet any angle,the sturdy arms can be adjusted by 190 degrees, it will not block yours sight while driving.is very easy and safe to install and remove quickly for the phone and tablet .
- 5）ACCESSORIES : Car phone tablet PC bracket 1PC, with 2PCS square metal plywood with 3M adhesive, need to be attached to the back of the phone and the back of the tablet, to ensure that the magnetic iron can be used close to the agnet bracket.
4. Tuff Tech 23383 Universal Super Stick Windshield/Dash Mount Phone/Tablet Holder
Feature
- DASHBOARD PHONE MOUNT: The adjustable phone mount is a custom fit cradle that holds onto your device while hitting the trails & off roading. Mounts to windows or dashboard with a strong suction cup.
- FOR MULTIPLE DEVICES: The phone holder features an easy one touch release system that securely holds the phone or tablet in place. The ball socket rotates 360 degrees for easy viewing. Compatible with devices up to 9″
- PHONE HOLDERS: Keep your eyes on the road with a multitude of phone holders with strong grips for rougher terrain. Perfect for different smartphone sizes & using GPS navigation.
- INTERIOR & EXTERIOR CAR ACCESSORIES: We provide you with plenty of car auto accessories to customize your vehicle. Check out our floor mats, deer alerts, phone cup holders, chargers Bluetooth speakers & more!
- AFTERMARKET ACCESSORIES: Custom Accessories is a family owned company & leader in the aftermarket automotive accessories marketplace. We are known for our extensive product line, product innovation & packaging solutions focusing on the consumers’ needs.
Description
The Tuff Tech Super stick windshield/dash mount phone holder is designed to securely hold your mobile devices. The heavy duty Super stick suction cup firmly affixes to the windshield or dash, staying in place even on rough terrains. The phone holder features an easy one touch release system that securely holds the phone or tablet in place. The ball socket rotates 360 degrees for easy viewing in the vehicle.
5. Tablet Car Mount Holder, Moclever Windshield Dashboard Tablet Mount Holder Universal Tablet Car Holder Compatible with Samsung Galaxy Tab/iPad Mini/iPad Air 2 /iPad Air/iPad 4(All 7-10 inch Tablets)
Feature
- [Cross Compatible] – Universal tablet suction cup mount, work well for pad and any other 7 -10 inches phone or tablets.
- [360 Degrees Rotation] – Adjustable arms on this windshield mount tablet holder can provide complete 360 degree rotatable holder for vertical and horizontal view.
- [Easy to Use] – You can use release and lock button on the back of this car mounts for tablets to ensure a tight clamp on pad and easy to adjust the length.
- [Tablet Car Mount Protection] – Padded device holder with Textured foam , protect your tablet and other device from scratch and collision.
- [Excellent Quaility] – Super strong windshield mount, keep your tablet stable and safe when you driving.Made of high quality material, Strong durable.
Description
Moclever 360 degrees Adjustable Tablet Car Mount Holder for 7-10 Inches Tablets
✡ What are the unique features❓:
Mounts general digital devices including ipad, tablet, GPS, DVD
Adjustable strong clamp suits 7-10.5 inch devices
Textured foam paddings attached on clamp prevent slip and surface scratches
Mount can rotate 172 degrees
Device clamp can rotate 360 degrees 88mm wide suction cup
Suits general cars
Easy setup
Compatibility(7-10 inches Tablets):
Apple iPad Mini/iPad air/4/3/2
Samsung Galaxy Tab 3 4 pro note 7.0/8.0/10.1
Sony Xperia Z/Z2 tablet
Dell Venue 7/Venue 8/Venue 8 Pro/Streak 7/XPS 10/Latitude 10
Lenove ideaPad S5000/ThinkPad Tablet 10/Lenovo Yoga 10
Acer Iconia A3-A10
Nokia Lumia 2520 etc .
✡ What is the specification ❓
Material: ABS plastic
Suction diameter: 3.46 inches/8.8cm
Suction cup mount size: 3.46”× 3.46”×5.31”/8.8× 8.8×13.5cm (L×W×H)
Device clamp size: width: 3.94”-7.68” height: 1.57”-2.16”/width: 10-19.5cm/ height: 4-5.5cm
Unit weight: 0.497 lbs/225.4g
✡ What is the package contents❓
1×Car Windshield Mount
6. Car Tablet iPad Holder Mount, Suction Cup Tablet Holder Stand for Car Windshield Dash Desk Kitchen Wall Compatible with iPad Mini Air Samsung Galaxy Tab A S Series All 7-10 inches Tablet
Feature
- Good Mate for Your Tablet : This tablet mount can be easily and safely used on car dashboard & windshield/ desk/ kitchen or any smooth surfaces, it can fit for most 7-10 inches tablets with case on, especially good for using as iPad holder.
- Convenient Adjustment：360 degree rotating joint ball and 180 degree rotating sturdy arm provide you much conveniences to adjust the tablet, you can get a perfect viewing angle very easily.
- Strong Suction Power: Durable high quality suction cup with temperature-resistant TPU sucker, plus one layer of premium washable tacky gel, provide strong adsorptive capacity on any smooth surfaces like car dashboard windshield. (Note: It is not suitable for leather surface.)
- Wide Compatibility: This tablet holder can be widely used in car/ office/ home, the washable suction base would never hurt the surface, please clean the surface before you mount this suction cup for better absorptive capacity.
- Warranty：Customer service is our top one priority, please feel free to contact us if there is any quality problem, we will give you a satisfied solution in 24 hours.
Description
This tablet holder is a very useful tool in daily life, not only can it be used on car dashboard/ windshield, but it also can be used on office desk/ bedside table/ kitchen cabinet. The extendable clip make it suitable for 7-10-inches tablet, especially good for iPad.
Features:
● Easy to use with no extra tool, just mount and play.
● Extendable clip with soft sponge inside, never hurt your devices.
● 360 degree adjustment iPad holder, relax your neck and free your hands.
● Washable and reusable suction base, you can mount it anywhere you want.
● Strong suction power with extra adhesive, make sure this car mount for tablet never fall off.
Installation instructions:
● Assemble the mount and clip, you can hear a sound of “ ka”, which means this car tablet mount are connected tightly.
● Clean the surface you want to place this car tablet mount, make sure it’s dry and smooth. (Not suitable for leather dashboard or leather texture dashboard)
● Place the mount on the exact place, press the “Press” button to exhaust the air from the suction cup, lock the base and adjust the clip to a comfortable angle.
● Place your device on the clip and lock it, then you can enjoy.
Specification:
Weight: 7.2 oz
Dimension: 4.7 x 3.7 x 7.5 inches
Material：ABS
Package included:
1 X Universal tablet holder for car
NOTE:
>This tablet mount holder fits for device that thickness is within 0.59 inch.
>We suggest to put the tablets over 9.7″ horizontally to get a better driving viewing without sight obstacle. And for the leather dashboard, please mount it on your windshield for a stronger holding.
7. Tablet Holder Car Air Vent Mount,OHLPRO Universal Dashboard Windshield 2-in-1 Cradle, TPU Suction Sticky Gel,for iPad/iPad Mini Samsung Galaxy Size 6"- 10.5" All Tablets
Feature
- 1)2-In-1 Design: this tablet mount with car suction cup mount and car air vent mount ,Can be used on dashboard ,windshield ,and car air vent ,this perfect combination guarantees that all the smartphone can be used.
- 2)Easy to operate : This car tablet mount can be 360 degree rotation and Sturdy arm can be in 190 degree adjustment , it will not block your view when driving ,it is very convenient to put it at the air outlet, whether you are navigating, listening to music or operating the mobile phone tablet.
- 3) Durable material : Durable steel POM plastic material,high temperature resistant TPU suction cup
- with a strong adhesive glue sticking on most dashboard and windshield ,and the suction cup strong adhesive glue can be in recycling using for the ipad mount .
- 4.Universal Compatibility : By extensive testing, 6-10.5 size tablet is compatible . Suitable for Samsung Galaxy Tab 4 3 / iPad Mini / iPad Air 2 / iPad Air / iPad 4 / iPad 3 / iPad 2 iPad Pro, PAD or other tablet devices .
- 5)Note: Dashboard car suction cup mount cannot be mounted on leather, wall or film glass surfaces. Sticky suction cups and adhesive holders should be cleaned before using . It is recommended to use a 6-inch to 8-inch tablet at the air outlet. If the large tablet is too heavy, it will damage the blade.
8. Can Am Maverick X3 Electronic Device tablet Phone Holder OEM NEW #715002874
Feature
- A great inride entertainment system platform
- Robust injected polypropylene fits right and installs easily atop dash
- Adjustable safety unit safely holds most model tablets and smartphones wider than 1.5″
- Combines seamlessly with garmin Montana 680T GPS and Complete MTX audio system
- Integrated storage 1 gal. capacity with access to dash 12v outlet for charging.
Description
Brand new, genuine Can-Am Electronic Device Holder. This is a factory original equipment accessory, not aftermarket. Non-current.
9. Bracketron NavGrip XL Car Dash Window Mount Holder for Tablets GPS iPhone X 8 Plus 7 SE 6s 6 Samsung Galaxy S9 S8 S7 S6 S5 Note Google Pixel 2 LG Garmin Nuvi TomTom Via Go Magellan DashCam Navigator BT1-651-2
Feature
- Are you planning a road trip and wanting the perfect phone holder to fit all your devices? This smartphone mount can expand up to 10 in, giving you low vibration to watch all your favorite movies and shows.
- The NavGrip XL can be easily transferred to a different car and it will continue to have the same stickiness as before. If the GPS holder does get dirty, just rinse the suction cup under warm water and let it air dry.
- This heavy-duty mount will secure all your devices. The NavGrip XL also has non-skid padding, so it will not leave any scratches. You will be able to access the device buttons and controls without any hassle.
- The NavGrip XL Dash and Window Mount is designed to be a universal holder for all your devices. You can place this phone mount in any vehicle, allowing you to be hands-free at all times.
- Press button to extend top grip. Squeeze down to ensure tight grip on device. Slide feet out for a wider base. Bottom grip is spring loaded for easy device insertion and removal.
Description
The NavGrip XL Dash and Window Mount is designed to safely allow you to mount your 7″ GPS , large phone or tablets up to 10″ for front seat navigational use. The larger than usual suction cup is made up of our Temporbond technology, which allows you to mount it to any smooth or textured surface without needing any messy adhesives. You can easily place and secure it by pressing the lever down. It is also transferrable between vehicles, just make sure that you clean the suction cup and dash with warm, soapy water, rinse and let it air dry before reattaching. The adjustable arms won’t interfere with your device’s controls. The NavGrip XL mount’s 360° rotating head adds even more versatility to the holder, allowing easy mounting in any orientation you prefer, while providing a secure base. The phone holder features rubberized grippers which will firmly hold your smartphone or tablet even on the bumpiest roads. This phone holder allows you to listen and watch to your favorite music and movies.
10. “Made for Amazon” SanDisk 64 GB micro SD Memory Card for Fire Tablets and Fire TV
Feature
- Certified “Made for Amazon” accessory SD memory card – the only one tested and certified to work with your Fire Tablet and Fire TV
- Load your Fire Tablet with more fun – by adding space for additional photos, music and movies
- Download your apps and games directly to the SD card
- Class 10 performance for Full HD (1080p) video recording and playback
- Designed to perform multiple simultaneous activities with no lag or delay
Conclusion
By our suggestions above, we hope that you can found Dash Holder For Tablet for you.Please don’t forget to share your experience by comment in this post. Thank you!
