Finding your suitable readers for dishwasher braket is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for dishwasher braket including detail information and customer reviews. Let’s find out which is your favorite one.
964 reviews analysed
1. Dishwasher Mounting Bracket Whirlpool Kit 2 Pack + 2 Mounting Screws – Undercounter Dishwasher Brackets Compatible with Whirlpool/Kenmore / Kitchenaid/Maytag / Amana
Feature
- INCLUDED: 2-pack anti-tip bracket provides a solid product at an excellent value. Brackets measure approximately 3 inches long x 1 inch wide (at the widest)
- HEAVY DUTY BRACKETS: Our undercounter dishwasher brackets are made with high quality commercial grade galvanized steel to ensure long lasting strength and performance.
- IDEAL FIT FOR MANY MODELS: Our brackets are comparable to part #8269145 / WP8269145 which fit Whirlpool, Kenmore, Kitchenaid, Maytag and Amanda dishwashers.
- EASY TO INSTALL: Quick and easy to install – installation instructions below. Comparable to OEM 8269145 / WP8269145, as well as AP3039168, PS393134, 830941, AH393134 and EA393134
- 1 YEAR WARRANTY: We stand behind our products and offer a 1 Year Warranty to all of our customers. Please contact us if you have any problems and we will resolve immediately.
Description
Comparable to OEM Parts include WP8269145, 8269145, EA393134, AP3039168, PS393134, 830941, AH393134 and many more.
FIXES THE FOLLOWING SYMPTOMS:
Door latch failure.
Door won’t close.
INSTRUCTIONS:
1. Turn off the power and water supply to avoid shock.
2. Open the dishwasher door and use a phillips screw driver to remove the screws that hold the dishwasher to the cabinet.
3. Close the dishwasher door and use it to pull the dishwasher out from the counter top. You only need to pull out far enough to expose the brackets.
4. The undercounter brackets are held in by the bent tabs on the bracket that hold the bracket in place. Straighten out the tabs and slide the bracket out.
5. Slide the dishwasher brackets into the same area you removed the original brackets and bend the tabs to secure the brackets to the dishwasher.
6. Finish by carefully sliding your dishwasher back under the cabinet. Use your provided screws to screw the dishwasher bracket directly to the underside of your counter with a Phillips screwdriver.
WHAT YOU GET:
2 x Dishwasher Mounting Brackets
2 x Mounting Screws
100% CUSTOMER SATISFACTION :
Feel free to contact us if you have any questions or problems with the item
2. Whirlpool W10426979 Mounting Bracket
Description
This undercounter mounting bracket for dishwashers is for solid surfaces like granite. Works with all standard size dishwashers. Can also be used on all stainless and plastic tall tub platforms.
3. Hotop 2 Packs 8212560 Dishwasher Side Mounting Brackets and 4 Packs Black Installation Screws, 2 Packs 8269145 Dishwasher Upper Mounting Brackets and 2 Packs Sliver Installation Screws
Feature
- You will receive: package includes 2 packs 8212560 dishwasher mounting brackets and 4 packs black installation screws, also includes 2 packs 8269145 dishwasher upper brackets and 2 packs silver installation screws
- Model No.: 8212560 dishwasher side bracket kit, 8269145 dishwasher upper bracket kit, sufficient quantity for you to replace the old or broken one
- Compatible with: these dishwasher replacement parts fit for most top name brands such as KitchenAid, Kenmore, Maytag, Amana, Jenn-Air, Estate, Magic Chef, Inglis, Roper
- Good quality: the replacement part is made from durable steel material and well-tested by the manufacturer, which can ensure long lasting strength and performance
- Please note: this is an aftermarket product (not original ),the mention of any related models and brands above is only for purposes of demonstrating compatibility
Description
2 Packs 8212560 dishwasher side brackets and 4 packs installation screws and 2 packs 8269145 dishwasher upper mounting brackets and 2 packs installation screws
8212560 Dishwasher side mounting bracket:
Material: metal
Quantity: 2 packs mounting brackets and 4 pieces install screws
Replace for part No.: 1201084, AP3953705
Color: black
8269145 Dishwasher upper mounting bracket:
Material: metal
Quantity: 2 packs upper mounting brackets and 2 packs install screws
Replace for part No.: WP8269145, WP8269145VP
Color: sliver
Practical to use:
Compatible with various most top name brands such as KitchenAid, Kenmore, Maytag, Amana, Jenn-Air, Estate, Magic Chef, Inglis, Roper.
Features:
Good quality and can be applied for a very long time.
Package includes:
2 x 8212560 Dishwasher side mounting bracket
4 x Installation screws
2 x 8269145 Dishwasher upper mounting bracket
2 x Silver installation screws
Warmly note:
Not original parts, the mention of any related models and brands above is only for purposes of demonstrating compatibility.
4. 2-Pack Undercounter Dishwasher Bracket Replacement – Whirlpool -Compatible – Compare to 8269145 / WP8269145 – Replacement Dishwasher Upper Mounting Bracket
Feature
- IDEAL FIT FOR MANY MODELS: Our brackets are a perfect fit for an array of Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) models, among others
- COMPARABLE TO OEM PARTS: Our dishwasher mounting brackets / undercounter dishwasher brackets are made from high-quality galvanized steel and are durable, robust, and made to last
- VALUE PACK: 2-pack anti-tip bracket provides a solid product at an excellent value. Brackets measure approximately 3 inches long x 1 inch wide (at the widest)
- EASY TO INSTALL: Quick and easy to install – installation instructions below. Comparable to OEM 8269145 / WP8269145, as well as AP3039168, PS393134, 830941, AH393134 and EA393134
- IF YOU HAVE ANY QUESTIONS ABOUT WHETHER THIS WILL FIT YOUR EQUIPMENT, PLEASE CONTACT US THROUGH AMAZON OR ASK A QUESTION. Please note: This is an aftermarket part produced by Impresa Products meeting OEM quality (based on in-house testing)
Description
1) Turn off power to your dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) 2) Rotate lower access panel fasteners and remove them 3) Remove access panel/sound dampening pad. Determine if the water supply/power lines have enough slack to move the dishwasher. If not, you will need to turn off water supply valve, disconnect water supply line from inlet valve & release power line from junction box 4) Open dishwasher door, remove the screws from the existing brackets (if present) 5) You will next be moving the dishwasher. To do so, you may need to lower the dishwasher by adjusting the leveling legs 6) Carefully pull dishwasher a few inches away from the front of the cabinet 7) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets 8) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place 9) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary). Replace the screws in your new brackets 10) Reverse steps 3, 2 and 1. ALL SET! This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) or Inglis (TM) OEM product and Impresa Products has no affiliation with or endorsement from these brands. Our product is not covered under any other manufacturer’s warranty (except for Impresa Products). The Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names and logos are the registered trademarks of their owners. Any use of the Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.
5. E-Z Dishwasher Mounting Bracket Made in USA
6. Appliancemate DD94-01002A Dishwasher Assembly-Install Kit fit for Samsung Dishwasher Mounting Bracket
Feature
- PARTS NUMBER: DD94-01002A Dishwasher Assembly-Install Kit
- Replaces part numbers: EAP4222710, 2077601, AP4450818,PS4222710.
- Package: Includes two mounting brackets and mounting screws.
- QUALITY GUARANTEED:The replacement part is made from durable high quality material and well-tested by the manufacturer. Non original aftermarket part. Fits OEM Standards!
- BUY WITH CONFIDENCE: For any reason you’re not completely satisfied , you can ask for a replacement or full refund.
Description
DD94-01002A Dishwasher Assembly-Install Kit fit for Samsung Dishwasher Mounting Bracket.
This filter fits models:DMT400RHS/XAA,DW7933LRASR/AA-0001, DW80K5050US/AA-01,DW80F600UTS/AA-01,DW80F800UWS/AA-01,DW80F600UTW/AA-01,DW80J3020UB/AA-00,DW80J3020US/AA-00,DW80J3020UW/AA-00,DW80K5050UB/AA-00,DW80K5050UG/AA-00,DW80K5050US/AA-00,DW80K5050US/AA-02,DW80K5050US/AA-03,DW80K5050UW/AA-00,DW80K7050UG/AA-00.
7. 5001DD4001A Mounting Bracket Kit Dishwasher for LG with Screws 6026050
Feature
- Package Includes: 5001DD4001A Dishwasher Mounting Bracket Kit,includes 2 brackets,2 hose clamp, and 2 screws
- Fits with various LG brand models,works with the following models: LG LDF6810BB, LDF6810BB-01, LDF6810BB-02, LDF6810ST, LDF6920BB, 5001DD4001A,6026050
- 6026050 Dishwasher Mounting Bracket with Screws
- Inexpensive way to fix or repair a dishwasher
- MONEY-BACK GUARANTEE: We stand by our words, if our product fails to deliver on what you expect of it simply return it and we will issue full refund…no questions asked.
8. Ultra Durable 8269145 Mounting Bracket Replacement Parts Exact Fit for Kenmore Whirlpool KitchenAid Dishwasher, Replaces 8269145 WP8269145VP
Feature
- Part Number: 8269145, 8269145 Undercounter Dishwasher Mounting Bracket, Replaces: WP8269145, WP8269145VP
- Works for brand: KitchenAid, Whirlpool, Kenmore, Maytag, Jenn-Air, Amana, Estate, Magic Chef, Inglis, Crosley, Roper
- PREMIUM QUALITY – The replacement part is made from durable high quality material and well-tested by the manufacturer
- SAVE TIME SAVE MONEY – Inexpensive way to fix or repair a dishwasher
- GUARANTEE: Discount Parts Direct is a US based company, from molding, stamping to assembly, inspection of each process has strict quality requirements and hand check. We offer customer 100% Money Back Guarantee. We appreciate your business.
Description
Replaces the following part numbers:
WP8269145, WP8269145VP.
Works for brands:
KitchenAid, Whirlpool, Kenmore, Maytag, Jenn-Air, Amana, Estate, Magic Chef, Inglis, Crosley, Roper.
Fixes problem with:
Door latch failure.
Door won’t close.
Contact Us
If you are not sure if part is correct, ask us in Customer questions & answers section or contact us by visiting the Discount Parts Direct storefront.
Business Wholesale
We are a small local company from Houston, Texas offer discount parts for retail and wholesale. If you need to purchase parts for business , please contact us for lower rates.
9. Ultra Durable 8269145 Mounting Bracket Replacement part by Blue Stars – Exact Fit for Kenmore Whirlpool KitchenAid Dishwasher – Replaces 8269145 WP8269145VP – PACK OF 2
Feature
- ✅
- MODEL NUMBER: WP8269145 | 8269145 Undercounter Dishwasher Mounting Bracket
- ✅
- EASY TO INSTALL – It is made exactly fit for most top name brand (KitchenAid, Whirlpool, Kenmore, Maytag, Jenn-Air, Amana, Estate, Magic Chef, Inglis, Crosley, Roper.) and replaces part numbers: WP8269145, WP8269145VP
- ✅
- PREMIUM QUALITY – The replacement part is made from durable high quality material and well-tested by the manufacturer
- ✅
- SAVE TIME SAVE MONEY – Inexpensive way to fix or repair a dishwasher
- ✅
- MONEY-BACK GUARANTEE – For any reason you’re not completely satisfied, you can ask for a replacement or full refund, no questions asked.
Conclusion
By our suggestions above, we hope that you can found Dishwasher Braket for you.Please don’t forget to share your experience by comment in this post. Thank you!
