We spent many hours on research to finding electric motors 1/4 hp, reading product features, product specifications for this guide. For those of you who wish to the best electric motors 1/4 hp, you should not miss this article. electric motors 1/4 hp coming in a variety of types but also different price range. The following is the top 10 electric motors 1/4 hp by our suggestions
541 reviews analysed
1. A.O. Smith GF2024 Century Resilient Base Split Phase Electric Motor, 115 Vac, 5.4 A, 1/4 Hp, 1725 Rpm
Description
Century Electric Motor, Resilient Base, Split Phase, Century, 115 VAC, 5.4 A, 60 Hz, 1/4 hp Power, Number of Phase: 1, 1725 rpm, 1/2 in Shaft Diameter, 1-1/2 in Shaft Length, Service Factor: 1.35, CW/CCW Rotation Type, Sleeve Bearing, Cradle Mounting, 1-3/8 in Mounting Hole Center, 54 % Efficiency, 40 deg C Ambient, Class B Insulation, Open Drip proof. Split phase motor, 5.4 amps, 60 hertz, auto protector, Sleeve Bearing, 1/2-Inch x 1-1/2-Inch shaft.
2. MARS – Motors & Armatures 10728 1/4hp 1075rpm, 1 Speed 1.8 Amp Outdoor Condenser Fan Motor
Description
1 speed motor; 1.8 amp; use to replace motor for other popular models; 16.7 pounds; 15 inches in length.
3. Dayton 1/4 HP Belt Drive Motor, Split-Phase, 1725 Nameplate RPM, 115 Voltage, Frame 48
4. Carrier Condenser Motor 5KCP39EGS070S 1/4 hp, 1100 RPM, 208-230V Genteq # 3905
Description
Suggested replacement reference for: 5KCP39EGY823S, 5KCP39EGS070S, Carrier HC39GE237A, HC39GE237, Dayton 6DLL0, GE 3905. **Please Note Product May Be Labeled GE or Fasco**
5. A1728, 1/4 HP Condenser Fan Motor 1075RPM, 1.8AMP
Feature
- 1/4HP, Outdoor Condenser Fan Motor, 208-230 volt, 1075 RPM, 1.8AMP
- Capacitor (not included) 5 MFD/370V
- Replaces: AOS Century FSE1026S, Emerson: 1860, MARS 10728, Fasco D909, GE/Genteq 3728, Packard 43728, Partner’s Choice: 01-0161, Rheem Protech W51-14CJA1-01, Carrier RCD: P257-8728, York Source 1: S1-FHM3728, Wagner: WG840728
- Repair video: https://youtu.be/VxEcFCR6TkI In addition, the motor comes with drain plugs on both end-shields. If you install the motor shaft (facing) down, you need to remove the drain plug on the shaft side end-shield. If you install your motor shaft up, you need to remove the plug on the non-shaft end. This will allow moisture and condensation to drain out of the motor
- All Angle, ball bearing
- Rheem mounting holes w/screws installed
- Water slinger on shaft
- Thru-bolt or band mounting
- Double full flatted shaft
- Class B insulation
- Single phase, 60 hertz
- Thermal overload protected
- Fan duty, continuous, air over
- Totally enclosed non-ventilated
- 36 inch leads
- Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find them on millions of HVAC units including Carrier, Goodman, Trane and other brands
- If you are a distributor, please continue your normal channel to source Broad-Ocean motors. Thank you. This retail venue is for contractors, repair technicians, and do-it-yourselfers, who otherwise may not have been adequately served with Broad-Ocean motors
Description
Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find it on millions of HVAC equipment including Carrier, Goodman, Trane and other brands. If you are a distributor, please continue your normal channel to source Broad-Ocean motors. The Amazon venue is intended for contractors, repair technicians, and do-it-yourselfers, who otherwise many not have been adequately served with Broad-Ocean motors.
6. Kitchen Basics 101 3.3 Inch Diameter Vent Fan Motor Direct Replacement For Nutone Broan
Description
Kitchen Basics 101 3.3 Inch Diameter Vent Fan Motor Direct Replacement For Nutone Broan.
Manufacturers’ part numbers are solely for identification. All materials supplied by us are our replacements for manufacturers’ parts. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
7. Century formerly AO Smith GF2054 1/2 hp, 1725 RPM, 115 volts, 48/56 Frame, ODP, Sleeve Bearing Belt Drive Blower Motor
8. A.O. Smith DL1026 1/4 HP, 1075 RPM, 3 Speed, 115 Volts3.5 Amps, 48 Frame, Sleeve Bearing Direct Drive Blower Motor
Description
Direct drive fan & blower motor, reversible rotation.
9. Century GF2024 1/4 For hp 1725 RPM 48 Frame 115V Belt Drive Furnace Motor
Description
Belt Drive Motor, Motor Application HVAC/R, Motor Sub Application Belt Dr Fan/Blower, Motor Type Split-Phase, HP 1/4, Nameplate RPM 1725, Voltage 115, Frame 48, Enclosure Open Dripproof, Mounting Cradle, Hz 60, Full Load Amps 5.4, Thermal Protection Auto, Insulation Class B, Service Factor 1.35, Bearings Sleeve, Max. Ambient Temp. 40 Degrees C, Rotation CW/CCW, Shaft Dia. 1/2″, Shaft Length 1-1/2″, Length Less Shaft 7-7/16″, Overall Length 8-15/16″, Body Dia. 5-5/8″, Resilient Ring Dia. 2-1/2″, Ring to Ring Center 7-3/16″, Nominal Efficiency 54.0%, Duty Continuous, RPM Range 1701-1800, Phase 1, Standards CSA Certified, Includes 5/8″ dia. Shaft BushingWARNING: California ResidentsThis product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
10. 1/4 hp 60 RPM 115V Bison AC Parallel Shaft Gear Motor Dayton Model 1LPP2, 5K940
Feature
- 1/4 hp, 60 RPM, 3.9 amps, 115 volts, 60HZ.
- Load Torque 200 inch pounds
- Over Hung Pounds = 190
- Rotation = Reversible
- Keyed Shaft Shaft = 3/4″ x 1-1/2″
- Motor has 4 non threaded bolt holes on face of motor that can be tapped out for 3/8″ bolts (stainless not recommended)
- One Year Manufacture Warranty
Description
V00323AB20. (5K940 discontinued, this is the replacement motor). The Dayton motor & Bison motor are exactly the same, both are made by Bison Gear Motors
Conclusion
By our suggestions above, we hope that you can found Electric Motors 14 Hp for you.Please don’t forget to share your experience by comment in this post. Thank you!
