650 reviews analysed
1. BCZAMD 24V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs
Feature
- Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc.
- The improvement compared to ordinary red heating tube:
- 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
- 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor.
- 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
Description
After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you
Specification
Voltage: 24V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350="">
Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.
Package listing:
3 x 24V 50W Ceramic Cartridge Heater
2. 12V 40W 1/4-in (6.35mm) Ceramic Cartridge Heater for 3D Printer MK10 Extruder/Hotend
Feature
- 12 Volt 40 Watt (12v 40w) MK10 3D Printer Ceramic Heater Cartridge with a 1/4-in (6.35mm) Diameter and 1m Wire
- Designed to be the proper OEM fit for 3D printers with a MK10 extruder and a 6.35 mm (1/4 inch) heater block bore
- Compatible with Wanhao Duplicator i3, FlashForge Creator, Monoprice Maker Select v1/v2/v2.1 FDM/FFF Printers with 1/4in heater hole
- Length: 20mm / Diameter: 6.35mm – Wire Length: 100cm
- 1/4 (0.25in) US Standard Size Often Hard to Find – Used on many American and Chinese Made 3d Printers designed for the US Market
Description
12V 40W 1/4-in (6.35mm) Ceramic Cartridge Heater
Fits Many MonoPrice/Flashforge/Wanahoo MK10 3D Printers with a 1/4in 6.35mm Bore Heater Hole
Please NOTE: This is a variation listing – You must select your voltage (12v or 24v) from the drop down menu at the top of the page
Specifications: Product: Single-head heating tube
Diameter: 1/4 inch / 6.35mm Length: 20mm
Wire Length: 3ft 3in / 1m Voltage: 12 Volt
Power: 40 Watt
Package Contents: 1pc – 40W 12V Ceramic Heater Cartridge with a 1/4-in (6.35mm) Diameter
3. Ewigkeit 24V 40W Heater Cartridge 620 Ceramic Hotend for 3D Printer Prusa Mendel (Pack of 5pcs)
Feature
- 24v cartridge Heater is made of 304 stainless steel material,Diameter: 6mm
- Length: 20mm
- Voltage: 24v, Power: 40w, Conveniently pre-wired with 1 meter long high temperature resistant wire
- Easy installation, wide temperature range, good stability, high reliability provide a high corrosion prevention
- Heating cartridges work with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer,Anet E10 etc
- 5pcs of 24V 40W 620 ceramic cartridge heater for 3D printer hotend
4. Ewigkeit 12V 40W Cartridge Heater 620 Ceramic and NTC Thermistor 100K 3950 for 3D Printer(Pack of 10pcs)
Feature
- Thermistor Color : white,Cartridge Heater Material: 304 Stainless Steel
- Voltage: 12v, Power: 40w,Diameter: 6mm
- Length: 20mm
- Temperature sensor 100KΩ accuracy of ± 1%
- Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring
- Support for NTC 3950 is included in Marlin firmware, use TEMP_SENSOR 11 in firmware configuration
5. BCZAMD 12V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs
Feature
- Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc.
- The improvement compared to ordinary red heating tube:
- 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
- 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor.
- 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
Description
After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you
Specification
Voltage: 12V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350="">
Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.
Package listing:
3 x 12V 50W Ceramic Cartridge Heater
6. Signstek 10 PCS Reprap 12V 40W 620 Ceramic Cartridge Heater for 3D Printer Prusa Mendel
7. Kweiny MK10 Heater Block 2PCS for 3D Printer Hotend Improved Version Fit with M3 and M4 Thermistor
Feature
- Compatibility: Fit with MK10 hotend M7 thread nozzle and throat, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc.
- Improved Version: According to customer feedback, a M3 threaded hole has been added to the aluminum block, making it suitable for both M3 and M4 thermistor
- Quantity and specification: 2 pieces MK10 aluminum heater block, For detailed dimensions, please refer to the drawings in the upper left
- Material: Aluminium alloy.
Description
Specification:
Compatibility:MK10 M7 nozzle, MK10 M7 throat, φ6mm cartridge heater, M3 or M4 thermocouples;
Shape size:20mm*20mm*13mm;
Material:Aluminium alloy.
Package include:
Aluminum heater block:2 pieces.
8. BZ 3D 12V 40W Cartridge Heater 620mm for Mendel Reprap Extruder 3D Printer Parts Ceramic Heating Tube for Creality CR-10 CR-10S S4 S5 Anet A8 (5 PCS) (12V40W)
Feature
- Get your hotend hot quickly and hit the highest of temperatures.
- Cartridge heater is made of 304 stainless steel material
- Diameter: 6mm
- Length: 20mm.
- Easy installation, wide temperature range, good stability, high reliability provide a high corrosion prevention.
- Heating cartridges work with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer,Anet E10 etc.
- 3D printer accessories temperature can be very high, pay attention to safety!
Description
★After-sales guarantee: each defective item can be replacement for free or refund.
If any question, please feel free to contact or QA us, BZ 3D is committed to providing you with the best service!
[Voltage]: 12V, Power: 40W
[Diameter]: 6mm ; Length: 20mm
[Material]: stainless steel
[Wire length]: 1M
Important Safety Guide:
★Recommend Safe Working Temperature : ＜300°C
★Must pay attention to the Safe working temperature of the 3D printer’s consumable and accessories, May cause high temperature hazards!!
PLA (190°C-230°C)
ABS (230°C-250°C)
Heater Block Cotton(＜300°C)
9. DAOKI 21PCS Heater Cartridge 24V 40W with NTC Thermistor 100K 3950,Temperature Heat Resistant Tape for 3D Printer with Thermistor Cartridge, Heat Resistant Tape, Heating Block Cotton
Feature
- Material : 304 stainless steel ,the core is made of Nickel-chromium alloy.
- Parameters：24V 40W, 6 x 20MM(Lead length 1M/39.3″)
- Thermistor :Temperature sensor 100KΩ accuracy of ± 1%
- High sensitivity, rapid response,easy installation, wide temperature range, good stability, high reliability.
- Heat Resistant Tape Used in various electrical/electronic product manufacturing processes due to its’ excellent heat resistance and electrical insulation.
Description
Specification:
Heater Cartridge:
Material: stainless steel
Core: Nickel-chromium alloy
Voltage: 24V
Power: 40W
Diameter: 6mm / 0.24″
Length: 20mm / 0.79″
Wire Length: 1m / 39.3″
Thermistor Cartridge:
Size: 1.25mmx2.0mm glass bead
High accuracy: 1%
Resistance value at 25°C=100K
Wiring length: 1m / 39.3″
Operating temperature range: -40 ° C + 300 ° C
Rated power: 45MW
Temperature Heat Resistant Tape:
Substrate material: Polyimide polymers film
Glue Type: Silicone
Substrate material thickness: 0.025mm
Thickness with adhesive: 0.05mm
Adhesive strength: 4.5N/25MM
Tensile Strength: 115N/25mm
Elongation: 50 %
Temperature Range:-73°C – 260°C
Package Included:
5 x Heater Cartridge
5 x Thermistor Cartridge
1 x Temperature Heat Resistant Tape
10 x Heating block cotton
Conclusion
By our suggestions above, we hope that you can found Flashforge Heating Cartridge for you.Please don’t forget to share your experience by comment in this post. Thank you!
