Top 10 Frigidaire Dishwasher Installation Kit

Eastman 8 ft. Stainless steel dishwasher installation kit includes all the necessary connectors to install your new dishwasher. The Supply line features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This kit also includes two elbow connectors. The dishwasher installation kit resists corrosion and is easy to install.

1) Turn off power to dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) and turn off water supply. 2) Pull dishwasher out from its place. 3) Remove upper screw from side of dishwasher. Align last hole of bracket on long flat part of bracket with screw hole. Reinsert & tighten removed screw or one of new provided screws. 4) Push dishwasher back into place. Open dishwasher door. Determine which bracket hole you will use. You want to use the farthest hole forward that still attaches to cabinet. If using holes on the smaller flat part of bracket, see 5A-6A. If you need to use back hole, see 5B-9B. 5A) If using front hole, leave bracket as is. If using 2nd hole, use 1 pair of pliers to hold bracket at the 2nd hole & 1 pair of pliers to break off front tab. Repeat. Push dishwasher back into place. 6A) Pre-drill screw holes to avoid splitting wood. Screw brackets into place using provided screws. DONE! 5B) If you cannot use either of front two holes on bracket, you will need to drill a hole in the tub. Use a sharpie to mark through back bracket hole on dishwasher. Repeat. Remove both brackets. 6B) Using 2 sets of pliers, break off both brackets before bend. 7B) Drill 3/8 inch hole through each side of plastic tub. Hold plastic tightly right below mark & use a drill slowly to ensure you have a nice clean hole without damaging the tub. Clean up both holes with razor blade until smooth. 8B) Put brackets back on, put dishwasher back into place. Pre-drill small holes into the cabinet wood, then screw in included screws on each side. 9B) Insert plastic plugs in each hole. Run dishwasher & check for leaks. If leaks are present, you may need to add rubber cement to plastic plugs to create a seal. This is a generic product manufactured & distributed by Impresa Products (TM). This is not a Frigidaire (TM) / Electrolux (TM) OEM product. Any use of Frigidaire (TM) or Electrolux (TM) brand names, models, etc. are made solely to describe & illustrate compatibility.

Product Description

The EZ-FLO 48336 Dishwasher Installation kit is a universal kit which fits major dishwasher brands. The water connector of the kit measures 6 ft in length. The corrosion-resistant supply line features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell and a grade 304 stainless steel braided exterior which is designed to prevent kinking, crimping and leaks. The braided surface enhances its design providing a modern look to your household. It includes hardware and fittings like hose thread and male pipe thread, hose clamp for drain hose and 3 wire nuts.

The additional fittings included in the kit makes it easy to install without any hassle.

From the Manufacturer

Eastman’s 6′ Stainless Steel Dishwasher Installation Kit comes with all the connectors and fittings required to set up your new dishwasher. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.

Product description

Whirlpool 8212488RC 6 ft. Reinforced Braid Dishwasher Hook Up Kit with Cord

From the Manufacturer

This kit includes everything needed for easy installation and fits most dishwashers. The kit includes a 6-Feet nylon braided, industrial grade water supply hose, 5-Feet power cord, Teflon tape, strain relief bracket, wire caps, and 3/8-Inch brass compression fitting with elbow and in-line tee. Water supply hose is better than stainless and will not conduct electricity like stainless steel.

Install your dishwasher with this all in one kit. Kit includes:

(1) 1/2″ F.I.P. X 3/8″ Compression x 16″ Water Supply Line

(1) 5/8″ O.D. Compression x 1/2″ M.I.P. Union

(1) 1/2″ F.I.P. X 3/8″ O.D. Tube x 3/8″ Tube Dual Outlet Valve

(1) 1/2″ M.I.P. 3/8″ F.I.P. Reducer Brushing

(1) Rubber Connection Boot with Barbed Adapter

(1) 1-1/2″ O.D. Tube x 6″ Dishwasher Branch Tailpiece

(1) 3/8″ Compression x 3/8″ Compression x 60″ Flexible Dishwasher Supply Line

(1) Pipe Thread Tape

Product Description

EZ FLO braided Stainless Steel Dishwasher Installation Kit comes with all the connectors and fittings required to set up your new dishwasher including a power cord. Its quality is determined by what you can’t see. The supply line features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent punctures, kinking and crimping. This flexible dishwasher connector supply line resists corrosion and is easy to install. It is compatible with all the industry standard Dishwasher brands.

This Dishwasher installation kit is perfect for non-professionals which saves time & effort. This kit comes with
72″ Stainless-steel braided dishwasher connector;
6′ Straight pigtail cord, UL listed;
(3) Yellow plastic wire nuts, #74B, 18-22 gauge;
(1) Stainless-steel hose clamp, #16 -for drain line;
(1) Romex connector

All these supplies make it easy to install.

How to install Dishwasher:
1. Disconnect or unplug all the electric and water line.
2. Slide the new dishwasher grasping it by the sides to avoid denting the front panel.
3. Don’t secure it to the countertop yet. Wait until you make all connections and adjustments.
4. Connect the water line, so it doesn’t leak.
5. With the supply line, the electrical cable and drain connected, turn the power and water back on and check for leaks.
6. Recheck the positioning, then screw the dishwasher to the countertop.

From the Manufacturer

Eastman’s 6′ Stainless Steel Dishwasher Installation Kit comes with all the connectors and fittings required to set up your new dishwasher including a power cord. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.

Product Description

Waste King 1023 Dishwasher Connector Kit

From the Manufacturer

Universal dishwasher connector kit.

Includes everything you need to connect a dishwasher to a water line