Top 10 Ge Simon Crystal Smoke Detector

This easy-to-install First Alert Z-Wave ZCOMBO-G Smoke and Carbon Monoxide Alarm is designed for compatibility with certified First Alert enabled Z-Wave Devices. It can send you mobile alerts in the event of an emergency and includes an insect-screened photoelectric smoke sensing chamber, an electrochemical carbon monoxide sensor, an 85-decibel horn, a tamper-resistant battery door, and a single test/silence button. This alarm is specifically designed for residential and institutional applications such as sleeping areas in hospitals, hotels, dorms, and multifamily dwellings defined in standard NFPA 101. Fully tested, it complies with UL217, UL2034, CSFM, NFPA 720, NFPA 101, and other standards modeled on those agencies. This combination alarm also meets building codes requiring a battery-operated Z-Wave wireless smoke and carbon monoxide detector, as well as ICC codes.

Product Description

This First Alert hardwired smoke alarm includes a 9-volt battery backup that continues to protect you in the event of a power failure. The detector features an ionization sensor for detection of smoke and fast-flaming fires, as well as a loud, 85-decibel alarm. One button silences any nuisance alarms, and also tests detector functions, while lights indicate if the alarm detects smoke. The latching alarm indicator automatically identifies which unit initiated the alarm, even after the conditions that set off the alarm have subsided. And an end-of-life signal enhances your safety by letting you know when it’s time to replace the unit. Connect it to compatible BRK or First Alert alarms within a single-family residence. When one alarm is triggered, all connected alarms will sound. There are generally two types of smoke alarms – ionization smoke alarms and photoelectric smoke alarms. Smoke particles of a varying number and size are produced in all fires. Ionization smoke alarms are generally more sensitive than photoelectric smoke alarms at sensing small particles, which tend to be produced in greater amounts by hot, flaming fires, that are consuming combustible materials rapidly and may spread quickly. Sources of these fires may include paper burning in a wastebasket, or a grease fire in the kitchen. Photoelectric smoke alarms are generally more sensitive than ionization smoke detectors at sensing large smoke particles, which tend to be produced in greater amounts by smoldering fires, which may smolder for hours before bursting into flame. Sources of these fires may include cigarettes burning in couches or bedding. For maximum protection, use both types of technology, such as in the Dual Sensor Smoke Alarm, on each level and in every bedroom of your home. Read moreabout choosing the right alarm, where to place home safety products and other fire safety information.

Amazon.com

Introducing the revolutionary BRK 9120 series smoke alarms which have been redesigned from the ground up. They install faster, perform better, and are even smarter than before. All of these improvements help reduce nuisance alarms and save you time and money. BRK Electronics smoke alarms are designed to be easy to install, easy to maintain, and quality-engineered for years of virtually maintenance-free service.

The 9120B AC-powered smoke alarm with battery backup includes these features:

• Ionization sensor which helps detect fast flaming fires that consume combustible materials rapidly.
• 120-volt AC inter-connectable (with maximum 18 compatible devices). The alarm can be interconnected with up to 12 other compatible smoke alarms and six compatible devices like bells, horns, repeaters and door closers. If one unit triggers an alarm, all smoke alarms in the series will sound. Power indicators show which unit in the series initiated the alarm.
• Latching alarm indicator which automatically identifies which unit initiated the alarm.
• Smart technology to reduce nuisance alarms.
• 9-volt battery backup for peace of mind during power malfunction.
• Single test/silence button which both silences a non-threatening alarm or low battery warning and allows you to test the unit’s functionality.
• Perfect mount system including a gasketless base for easy installation and new mounting bracket that keeps the alarm secure over a wide rotation range to allow for perfect alignment.
• Mounting bracket lock for tamper resistance.
• Dust cover to keep unit clean during construction.
• 10-year limited warranty.

All BRK Electronics smoke alarms meet UL 217 standard and are listed with the California State Fire Marshal. They use the new UL mandated repeating 85-decibel alarm horn pattern. 10-year limited warranty. This unit is approved for sale in Oregon after new revisions on law HB2586.–Bree Norlander

What’s in the Box
One smoke alarm, one 9-volt battery, and user’s manual

See all Product description

Product Description

The First Alert SCO5CN Combination Smoke and Carbon Monoxide Alarm features dual sensors to detect both smoke and carbon monoxide in a single device. A photoelectric sensor detects the smoke most often produced by smoldering fires, and minimizes false alarms from cooking smoke or shower steam. Additionally, the advanced electrochemical CO sensor detects carbon monoxide leaks from multiple sources, such as faulty fuel-burning appliances, blocked chimneys, and generators running inside or too close to homes. A loud, 85-decibel siren alerts you to the threat; unique alarm sounds and indicator lights on its face distinguish a smoke warning from a carbon monoxide warning. This carbon monoxide and smoke detector is battery operated, so you don’t need an electrician for installation. Requiring just two AA batteries and featuring an easy-access battery compartment for quick changes, this smoke and carbon monoxide detector has a single button that allows you to silence a false alarm or test the unit. If your carbon monoxide alarm keeps chirping, the battery may be low or weak. On First Alert carbon monoxide detectors, check to see if the battery light is yellow or green. If the alarm is chirping and the light is yellow, it means the battery is low. The way to get a carbon monoxide alarm to stop chirping is to replace the battery.

Amazon.com

Carbon monoxide (CO) is the leading cause of accidental poisoning deaths in America, yet many people don’t know they are suffering from CO poisoning until its too late. Since symptoms of CO poisoning are like the flu, you might not even know you’re in danger at first. That’s why a carbon monoxide alarm is an excellent way to protect your family. It can detect the CO you can’t see, smell or taste in the air.

The First Alert SCO5CN carbon monoxide and smoke alarm uses an electrochemical carbon monoxide sensor-the most accurate technology available. The alarm uses photoelectric smoke sensing technology which is environmentally friendlier and which reduces nuisance alarms, making it ideal for cooking areas. It is also great for sensing slow smoldering fires quickly. The permanent sensors last the lifetime of the alarm. The test/silence button both silences a non-threatening alarm or low battery warning and allows you to test the unit’s functionality. A low battery signal alerts you to replace the battery and end-of-life alarm of three chirps alerts you to replace the unit. Two AA batteries are included. 5-year limited warranty. UL listed. Not available for sale in Massachusetts.–Bree Norlander

What’s in the Box
One combination carbon monoxide and smoke alarm, two AA batteries, and user’s manual. This does not contain voice feature.

The Kidde i12040 contractor 6 pack is sold as one master pack that contains 6 individual units. These alarms are 120-Volt hardwired ionization smoke alarm with 9-Volt battery backup and Hush feature. Smoke alarms have the ability to function as single units or in an interconnected system.

Test button, tests unit’s electronic circuitry, horn, and battery function
9-Volt battery back up (21025830)
Quick connector – makes installation fast and easy
Tamper resist locking pin – helps deter alarm tampering and theft
Hush feature – temporarily silences nuisance alarms

Voltage (volts): 120
Connector/Contact Type: 3-Wire
Alarm/Detector Features: Battery Back-Up,Hush Feature,Interconnected,Value Pack
Pack Size: 6
Alarm Type: Smoke
Commercial / Residential: Commercial / Residential
Power Source: Hardwired
Included: Batteries
Alarm Sensor Type: Ionization
Certifications and Listings: 1-UL Listed

Product Width (in.): 6.6
Product Height (in.): 6.5
Product Depth (in.): 10.7
Ship Width: 8
Ship Height: 10
Ship Length: 12

Product Description

The Kidde I9010 is a 10-year, sealed battery operated smoke alarm featuring hush™, alarm memory, and a self-activation mechanism that makes installation simple and easy. The alarm will automatically activate when it is attached to the mounting bracket; there are no pull-tabs, no switches-everything is automatic. The sealed-in board-mounted battery will power the unit for its complete 10-year life. No replacement battery will ever be needed, and an end of life alert indicates when it is time to replace the alarm. At the end of the alarm’s 10-year life, deactivation of the alarm is just as easy. Using a tool such as a small screwdriver, a deactivation switch removes power from the alarm and renders the battery safe for disposal. As an added safety mechanism, The alarm lockout feature prevents a deactivated unit from being mounted back on the mounting bracket. This alarm also features hush™ technology, allowing consumers to temporarily silence nuisance alarms, and an alarm memory feature that alerts the user via rapidly flashing LED lights if the alarm has sounded since the last time The test/Reset button was used. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fire that can occur within the home.

Amazon.com

No need to worry about faulty batteries with the Kidde i0910 10-Year Sealed Lithium Battery-Operated Smoke Alarm. This worry-free alarm contains a sealed-in lithium power supply that lasts the lifetime of the unit. Dependable and easy to install, this no-maintenance alarm saves on labor and battery costs over its lifetime. Save up to $60 in Battery Replacement Costs This worry-free smoke alarm can save you a lot of time and money over its lifetime (an estimated $60 over the 10 year life of the alarm). This alarm can save you–and the local landfill–from the cost, hassle, and waste of lots of batteries. This smoke alarm is also a great choice for hallways and high ceilings, where changing batteries can be especially difficult. Never Replace a Battery Again. View the 10-year worry-free smoke alarm. i4618 Never change a battery again. The Kidde Sealed Lithium Smoke Alarm saves you up to $60 and eliminates battery replacement hassles. Product Highlights No battery replacement for the lifetime of the alarm Powered by a tamper-free sealed lithium power supply Self-Activation automatically activates unit when attached to bracket Smart Hush silences alarm in non emergencies Money-saving alarm is great for homes and rental properties This alarm uses ionization sensing technology for the smoke alarm. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. Great for Homes and Rental Properties This tamper-free alarm prevents battery or alarm removal, eliminating worry about unauthorized battery removal or unauthorized deactivation of the alarm. Also, this alarm is a good choice for rental properties and high-density dwellings, as its sealed tamper-free design prevents theft, while also reducing labor and material costs. This helps to ensure that the property and inhabitants are protected by a fully operational alarm. Easy to Install with Self Activation The innovative automatic activation of this alarm is unlike any other smoke alarm design. The alarm will automatically activate when it is attached to the mounting bracket; there are no pull tabs and no switches–everything is automatic. At the end of the alarm life, the unit will chirp, indicating the alarm is in need of replacement. You can use a simple tool, such as a screwdriver, to deactivate the unit, stopping the low-battery chirp and making the alarm safe for disposal. The sealed-in board-mounted batteries will power the unit for its complete 10-year life. No replacement batteries will ever be needed. Trademarked Hush Feature for Convenience By pressing the smoke alarm’s Hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners. This alarm’s Smart Hush feature has the capability of temporarily desensitizing the alarm circuit for up to eight minutes. This feature is to be used only when a known alarm condition, such as smoke from cooking, activates the alarm. The smoke alarm is desensitized by pushing the Test/Hush button on the smoke alarm cover. If the smoke is not too dense, the alarm will silence immediately. The red LED will illuminate for 1.5 seconds every eight seconds while in Hush mode. This indicates that the alarm is in a temporarily desensitized condition. Additionally, the smoke alarm will automatically reset after approximately eight minutes and sound the alarm if particles of combustion are still present. Smart Hush can be used repeatedly until the air has been cleared of the condition causing the alarm. Pushing the Test/Hush button on the alarm will end the hush period. Power Outage Protection, Indicator LED, and Test Feature A 10-year sealed lithium battery powers this alarm, providing continuous protection against smoke and fire hazards even during power outages. Because a smoke alarm only helps protect you if it’s working, this unit features a red LED that flashes every 40 to 45 seconds to indicate that it is operating correctly. For additional peace of mind, the alarm contains a Test/Reset button that enables you to periodically test its circuitry and horn. The unit measures just 5.6 inches in diameter and 1.5 inches in depth, and it features a neutral, white finish. This smoke alarm is UL listed, so you can be confident of its quality, and it is backed by a 10-year limited warranty. About Kidde: A UTC Fire & Security Brand Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls, such as flame detection and explosion-suppression systems. Kidde is a UTC Fire & Security brand, with a history that’s rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world’s first wireless networked smoke detectors in 2004. What’s in the Box Kidde i0910 10-Year Sealed Lithium Battery-Operated Smoke Alarm with mounting bracket and hardware, 10-year limited warranty, and bilingual user’s manual.

This smoke alarm features a TestReset button that verifies alarm circuitry and alarm activation. It responds best to fast-raging fires. Smoke Alarm, Detection Method Ionization, No Interconnection Capability, Power Source 9V, Audible Alert 85dB @ 10 ft., Horn, Visual Alert Red LED, Diameter 5 In., Height 1-3/4 In., Digital Readout No, Battery Backup No, Features Test Button, Intermittent Red LED, Hush Button No, Locking Pin Yes, Operating Temp. 40 Degrees to 100 Degrees F, Standards UL, NFPA, Federal Housing Authority, Housing and Urban Development and California State Fire Marshal Guidelines

Complete Home Protection

According to US data analysis, a family fire begins every 38 seconds. The faster you know about the fire, the sooner you start moving your family, and the smoke alarm at work reduces the risk of home fire deaths by 50%.

Advantage

1.The smoke alarm with test button allows you to test the unit’s functionality. 

2.It features a low battery alert to remind you when to change the battery and has a missing battery guard to ensure that a battery is placed inside the alarm. 

3.The side battery drawer slides open for easy battery replacement. A blinking power indicator on the unit confirms that it is receiving power.

4.The alarm contains an optional pin to lock the battery and unit in place for tamper resistance. 

5.It can be mounted on either the ceiling or the wall and can be used in mobile homes and RVs.

Attention1.The Smoke Detector contains the test button.Flickering power indicator,When the red LED light flashes for 32 seconds, it indicates that the smoke alarm is running normally.

2.When the alarm senses products of combustion and goes into alarm, the red LED will flash rapidly (one flash per second)..The rapid flashing LED and pulsating alarm will continue until the air is cleared or the test button is released.

Specifications: 

1.DC 9V battery operated 

2.Photoelectric chamber for early detection from all directions 

3.Loud>85dB (A) alarm signal @3M 

4.Flash alarm indicator (red LED). 

5.Test button for easy recommended monthly testing

6.Low battery signal 

7.Safety clip feature, does not allow mounting of smoke alarm without battery installed

8.Ceiling mounting 

9.Easy to install with mounting bracket 

10.5 years prodcut life time