The Best Heating Pipe Element
735 reviews analysed
1. Twidec/ 8x100mm Cylinder Cartridge Heater 110V 200W Hot Rod Heating Element Replacement Electric Heating Pipe Fittings
- Product Name: Cartridge Heater
- Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc .
- Material: Stainless Steel,PVC,Nylon
- Main Color: Silver Tone, Blue
- Rated Voltage :AC 110V
- Power :200W
- Heater Size(Approx.): 8 x 100mm/0.3″ x 3.9″(D*L)
- Wire Length(Approx.) :27cm/10.7″；Net Weight :50g
- Package Content :1 x Cartridge Heater
2. EcoSmart 8 KW Electric Tankless Water Heater, 8 KW at 240 Volts with Patented Self Modulating Technology
This Smart Technology electric tankless water heater is configured as a “whole home” model for one bathroom residences in climates where incoming water temperature is 67°F and above. This model is well suited for heating nearly 1.5 gallons per minute to 105°F at that inlet temperature, which is the equivalent of one water saver shower head. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 8 requires a minimum 100 amp electrical panel for installation with (1) 40 amp double pole breaker connected to (1) set of #8 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.
From the Manufacturer
This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.
3. TOPDURE JHSD 15-feet Pipe Heating Cable Built-in Thermostat
- Pre- assembled with power indicator light and built in thermostat (Below 37F ON, Over 50F OFF) .
- Prevent pipe freezing down to -40° F (-40° C).
- Used on water filled rigid metal and plastic pipes.
- 7watt/ft 120V.Can’t be cross, spiral or overlapped.
- 6ft 18/3 cold lead with grounded plug. 2 year warranty.
4. DERNORD Immersion Cartridge Heater 120V 1500W Hot Rod Heating Element Replacement 3/4 Inch Thread
- Cartridge Heater 120v 1500w
- Thread: 3/4 Inch
- Tube length: 200mm (7.9 Inch）
- Cartridge heaters is consist of a cylindrical stainless steel 304 tube and thus provide a high corrosion prevention
- Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
1500W Cartridge Heater: Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
From the Manufacturer
The Dernord 120v 1500w Cartridge heaters are an extraordinarily versatile and durable product that is used to heat a myriad different processes from heavy industrial – plastics and packaging applications to critical care medical devices and analytical test instruments to being used on aircrafts, railcars and trucks. Cartridge heaters are capable of operating at temperatures of up to 1400F and achieving watt densities of up to 260 watts per square inch.
1: Boiling water because of flange
2: Patient Comfort heating used in medical devices
3: Mold die and platen heating
4: Seal bars used in packaging equipment
5: Heating of hot stamps
Thread: 3/4 Inch
Tube length: 200mm
Wire length: 50cm
5. HEATIT JHSF 80-feet 120V Self Regulating Pre-assembled Pipe Heating Cable
- JHSF doesn’t work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment. HEATIT is registered Trademark by zhukeshi(We didn’t authorize other sellers in Amazon.com).
- Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
- Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2″ in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
- ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shrinkage tube for connection.The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we’ll try our best to solve your issue
6. Dernord 240V 5500W Immersion Ripple Foldback Brewing Water Tubular Heater Element with 1 Inch NPSM Thread White
- Low Watt Density Stainless Steel Immersion Ripple Foldback heating element
- Provides 5500w 240v of power
- The shape is to minimize length and maximize heated surfaces
- Easy to Install and fits most Water Heater Models of American
- Resists dry firing, lime deposits, and sand that would burn out ordinary elements
5500W Element : Replacement American standard water heater parts
From the Manufacturer
Dernord 240v 5500w Immersion Ripple Foldback Brewing Water Tubular Heater Element has a compact, energy efficient design that is well suited for many applications. The type of element is to minimize length and maximize the heated surface.It provides uniform heat distribution and offered long performance life, and fits more models of American,for Bradford White, Craftmaster, General Electric and Whirlpool heaters.
Item Weight: 16.9ounces
Tube length: 333mm
Tube diameter: 8mm
Item Package Quantity: 1
Mounting Type: Threaded
7. Watts LFTWH-FT-HCN Service Valve Kit for Tankless Water Heater
- TANKLESS WATER HEATER VALVE KIT: Series LFTWH tankless water heater valves are designed to simplify the installation, maintenance and operation of tankless water heaters.
- SERVICE VALVE SET: The Valve Kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations
- Color coded tee handle
- MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Cold water inlet and hot water outlet valves facilitate service and maintenance. Hot and cold service valves is certified to NSF/ANSI 61
- LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight
- SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L – Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH – Lead Free Tankless Water Heater Valves.
This Watts Series THW Tankless water heater valves are designed to simplify the installation and maintenance of tankless water heaters They replace up to 18 fittings and 16 connectors used in typical tankless water heater installations Available in two valve sets for both hot and cold water with 3/4-inch female threaded union brass fittings. No additional adapters required
From the Manufacturer
This Watts Series THW Tankless water heater valves are designed to simplify the installation and maintenance of tankless water heaters They replace up to 18 fittings and 16 connectors used in typical tankless water heater installations Available in two valve sets for both hot and cold water with 3/4-inch female threaded union brass fittings
8. Atwood 92249 Electric Water Heater Replacement Parts – 110 VAC Element/Gasket Kit
Atwood 92249 Electric Water Heater Replacement Parts – 110 VAC Element/Gasket Kit. Atwood Mobile Products, LLC has been a world leader in designing, engineering and manufacturing appliances and hardware for the RV industry for over 30 years. Whether it’s our constant drive for innovation and improvement or our unwavering commitment to our customers it’s no coincidence that Atwood Mobile Products, LLC has found itself an integral part of the RV industry for now and many years to come.
9. DERNORD 240V 3500W Water Heater Element Screw-in Heating Element High Watt Density (240V 3500W)
3500W Water Heater Element : Replacement American standard water heater parts
From the Manufacturer
The Dernord 240v 3500w High Watt Density Screw in Water Heater Element has a compact, energy efficient design that is well suited for many applications. The element is folded back to minimize length and maximize the heated surface.It provides uniform heat distribution and offered long performance life, and fits more models of American,for Bradford White, Craftmaster, General Electric and Whirlpool heaters.
Item Weight: 10.5ounces
Voltage: 240 volts
By our suggestions above, we hope that you can found Heating Pipe Element for you.Please don’t forget to share your experience by comment in this post. Thank you!