We spent many hours on research to finding lyons whirlpool in line heater, reading product features, product specifications for this guide. For those of you who wish to the best lyons whirlpool in line heater, you should not miss this article. lyons whirlpool in line heater coming in a variety of types but also different price range. The following is the top 8 lyons whirlpool in line heater by our suggestions
552 reviews analysed
1. EcoSmart ECO 11 Electric Tankless Water Heater, 13KW at 240 Volts with Patented Self Modulating Technology
Feature
- Lifetime warranty
- Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
- Never run out of hot water with an ECOSMART tankless water heater
- Patented Self Modulating Technology and design
- ECOSMART tankless water heaters are 99.8-percent energy efficient.Uniform Energy Factor:0.98
Description
Product Description
This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.
NOTE : 11Kw at 220 is equal to 13kw at 240.
From the Manufacturer
This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.
2. Ecosmart ECO 18 Electric Tankless Water Heater, 18 KW at 240 Volts with Patented Self Modulating Technology
Feature
- The product is highly durable
- The product is easy to use
- Manufactured in China
- Copper and stainless components
- Lifetime warranty for residential use
- Save up to 60% on your water heating costs with the most advanced, self modulating technology available
- Never run out of hot water with an ECOSMART tankless water heater.
- Save up to 12 cubic feet of storage space.
- Digital temperature control in 1-degree increments gives users complete control of hot water
Description
Product Description
This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 62°F and above. The ECO 18 is capable of heating over 2.5 gallons per minute, which is the equivalent of one water saver shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62°F, and an output setting of 105° F. Two showers emitting no more than 1.5 gpm each can be run simultaneously when incoming water temperature is above 70° F. Digital temperature control allows you to set your temperature in increments of 1°. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. However, when sized properly it will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 18 requires a minimum 150 amp electrical panel for installation with (2) 40 amp double pole breakers connected to (2) sets of #8 awg wire. Plumbing connections are 3/4″ NPT. For additional assistance please feel free to contact our support center at 877-474-6473.
From the Manufacturer
This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 62 Degree F and above. The ECO 18 is capable of heating over 2.5-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62 Degree F. Two showers can be run simultaneously when incoming water temperature is above 70 Degree F in warmer climates such as South Texas, South Florida, New Mexico, Arizona and South California. These models come with a digital temperature control that allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.
3. Ecosmart POU 3.5 Point of Use Electric Tankless Water Heater, 3.5KW@120-Volt
Description
Product Description
This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. This heater is flow controlled, meaning the temperature will adjust according to flow rate. It is the smallest sized Ecosmart electric tankless model and should not be used to run anything more than one sink at a time or used in areas where inlet water temperature is lower than 57°F. At this inlet temperature the ECO POU 3.5 can heat 0.5 gallons per minute to 105°F. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor’s Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. When sized properly this water heater will provide endless hot water. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The Eco POU 3.5 requires a minimum 100 amp electrical panel for installation with (1) 30 amp single pole breaker connected to #10 awg wire. Plumbing connections are 1/2″ NPT. For additional assistance please feel free to contact our support center at 877-474-6473. TROUBLE SHOOTING STEP: When the water is not hot enough, please slow down the flow of water to increase temperature!
From the Manufacturer
This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor’s Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.
4. Atmor AT-900-03 Single Sink 3kw/110V, 0.5 GPM Point-Of-Use Tankless Electric Water Heater and 0.5 GMP Sink Aerator
Feature
- Ideal for single sink application in areas with at least 57° ground water temperature
- Maximum flow rate 0.5 GPM (Gallons per Minute) = 45° F temperature rise. Slower flow rate = higher temperature rise.Max tested working pressure: 16 BAR (230 PSI)
- Requires a direct connection to a 30 Amp single-phase breaker. Required wire size: 10 AWG. Not a plug-in unit.
- Instant and endless hot water on demand without the wait or worry of ever running out
- Includes a 0.5 GPM Aerator for sink faucet and Pressure Relief Device (PRD)
Description
SAVE ENERGY, WATER, MONEY, TIME – Atmor offers the efficient and convenient water heating solution you have been looking for. Atmor 3kW/ 110V Point-of-Use Tankless Electric Instant Water Heater provides an unlimited flow of hot water without the wait or worry of ever running out. That’s right, instant hot water on demand! This unit is specifically designed for hand washing SINGLE SINKS in areas with at least 57°F ground water temps (See Sizing Guide). Please note that this unit will not operate properly in Northern regions with inlet water temps colder than 57 degrees. A flow rate of 0.5 gallon per minute (GPM) is required in order to achieve a 45° temperature rise. Perfect for residential and commercial use, this compact unit can be installed against the wall either under the sink out of sight or near the point of use. Unit requires a 30 Amp dedicated single-phase breaker. This is NOT a plug in unit. Required wire size: 10 AWG. Standard 1/2″ NPT (straight thread) fittings. Maximum flow rate is 0.5 GPM. Maximum temperature rise possible for unit is 45°F. For safety reasons, the included Pressure Relief Device (PRD) included must be installed on your water heater per the instructions in the owner’s manual. In order to achieve maximum performance, it is recommended to install the included 0.5 GPM sink aerator. Failure to comply with the installation and operating instructions in our Owners Manual or improper use will void the warranty. The water heater must be installed by a licensed electrician in compliance with all local and building regulations.
5. Rheem 240V Heating Chamber RTEX-13 Residential Tankless Water Heater
Feature
- External adjustable digital thermostatic control with LED display (+/1 degree accuracy
- Durable Copper immersion two heating elements, field Serviceable.Self-modulating power control
- Simple installation – 3 foot electric cable and 1/2 NPT adapters included
- side 1/2 inch Compression water connections
- 99.8% energy efficient. External controls to adjust temperature in increments of 1°f. Water-Saver Shower Head – 1.5 GPM
- Threaded for easy replacement, simple installation, digital temperature display
- 54 A
Description
Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications
6. ECOTOUCH Electric Tankless Water Heater Point-of-Use Hot Water Heater Digital Display for Energy Efficiency 5.5kW at 240V, White
Feature
- 【INSTANT & SUFFICIENT HOT WATER】Applied with 5.5KW heating system, the electric water heater supplies instant, consistent and endless hot water of 116℉or higher temp shortly, no waiting for preheat nor terrible temp up & down, perfect companion for sinks. Time to get rid of those “lukewarm” toys.
- 【SMART SELF ADJUSTMENT】The hot water heater adjusts power input based on flow rate and temp setting in real time. For example, less power will be applied by the system when waterflow reduced, thus you still get ideal temperature instead of scalding hot water, which means comfortable experience. Optimal energy efficiency of 98% saves considerable electric charge.
- 【CONVENIENT USE】The tankless water heater comes with digital display & touch control panel so temp setting is easy job. Now turn on the tap and let the smart unit do the rest, you needn’t go through hard lesson about temp setting by a mixer tap without any hint. The Black model comes with Remote control, useful for installation under sink.
- 【SAFE and DURABLE】Applied with multiple protection devices, every piece goes through strict tests to ensure 100% safe. Inner water and electricity lines are designed to run separately so as to avoid leakage or harm of scale build up. Approval by ETL and qualifies for UL, you can expect outstanding performance for years to come.
- 【POINT of USE】The sleek tankless water heater is compact as an oatmeal box, making it possible to install anywhere close to outlet and avoid energy waste. It can be mounted horizontally, vertically, obliquely, ideal for kitchen, bar, school, hospital, community and hair salon. Please verify it is the right size for you: 5.5kW@240V
- dimensions 11″ x 7.5″ x 2.35″
- pipes fittings :1/2″ NPT.
Description
FEATURES
Instant hot water comes with powerful 5.5kW heating element, expect hot water for 3 seconds, perfect choice for sinks to provide endless hot water any time.
ENERGY SAVING
This tankless water heater avoids standby heat loss of those bulky storage water heaters, minimize energy waste and achieve 65% energy saving with help of its smart self adjustment technology.
HEALTHY WATER QUALITY
Traditional bulky water tanks store water for long time, causing bacterial growth and rust issue, time to get clean water via a tankless hot water heater. The ECOTOUCH unit separates water and electricity line so as to avoid issue of calcium deposits.
MULTIPLY SAFETY PROTECTIONS
Over temperature protection
Dry heating protection
Leakage protection
Water and electricity line separated
EASY INSTALLATION
Real compact design, water heater cooridates with scenes decor, above sink or under sink water heater, horizontally, vertically or obliquely installation. Comes with easy installation brackets, pipe fitting of 1/2″ NPT and 12AWG power cord(fixed to the unit) so you don’t to have to hire a plumber even if you can do it.
SPECIFICATIONS
Power: 5.5kW
Voltage: 240V~60Hz
Min. water flow to activate the unit: 0.475GMP
Max tempt rise from 67°F to 120°F @ 1GPM
Max. Amperage: 23A
Recommended wire size: 12AWG
Required circuit breaker : 1x 2-Pole 30 AMP
KINDLY NOTE
1.The unit is mainly for sinks, not for shower purpose.
2.The tankless water heater should be installed professionally.
3.Please read instruction manual carefully prior to installation and use!
PACKAGE INCLUDES
1X ECOTOUCH 5.5kW instant water heater
1X Instruction manual and warranty card
1X Installation accessories
1X Remote control(for Black model)
7. Hygger 500W 300W Digital Quartz Aquarium Heater, Fast Heating Submersible Thermostat for Fish Tank 30-120 Gallon, with External IC Thermostat Controller and Thermometer
Feature
- ????【Fast Heating Up】voltage 110-120V/60HZ, power 500W, US three-pin plug, heater rod length 10.5 inch, 500W submersible heater for fish tank 60-120 Gallon. The heater power cord is 6ft, the controller power cord is 5ft, the thermometer cord is 4.6ft. Temp range: 61-90℉. Fast heating up aquarium heater, it takes about 3 minutes to heat 3.5 gallon water up 3℉
- ????【Fully Automatic Control】very easy and reliable to use. After finishing the temperature setting, the fish tank heater will run automatically by itself. It will stop heating when the water temp reaches to the set temp, please note that the water temp may go up 1℉ more because of the waste heat. When the water temp is cool down to 1℉ less than the set temp, the tank heater will restart heating
- ????【Quartz Tube & Plastic Guard】With high-quality quartz glass tube, it’s very durable and explosion-proof, this fish tank heater can be used for saltwater and freshwater aquariums, service life can be 3 years or more. With low profile black plastic guard, easy to hide in the tank. The guard can prevent your aquarium pets from burned, the gaps on the guard is about 3mm, no worries for fish stuck
- ????【Digital LED Display Controller】the external IC temp controller can show the water temp with 2 blue LED digits. Only show Fahrenheit degrees. To set the temp, just press the button over and over until the screen displaying the temp you desired, then stop and wait the digit flashing for 3 times, the setting is done and the led shows the current water temp again. The controller is connect with separate sensitive thermometer
- ????【Fully submersible Aquarium Heater】with strong suction cups on the heater guard and the thermometer, it’s easy to install the aquarium heater no to the tank walls or bottom, please keep them fully submerged. The thermometer should be away from the heater and keep water circulation as far as possible
8. Fluval E Electronic Heater
Feature
- Dual temperature sensors provide accurate and real time water temperatures
- LCD temperature display available in both Fahrenheit and Celsius
- Range of 68 to 93 degrees Fahrenheit
- Fast heat technology built with a safety shut-off
- Integrated fish guard to protect fish and invertebrates
- Equipped with a slim profile mounting bracket
- Colored display alert system
- Suitable for aquariums up to 100 gallons
- 300 watts
- 5 year warranty
- Check out user manual under Product details before using the item.
- The heater is factory calibrated. Variables such as lower room temperature, wide fluctuations, lack of an aquarium cover, presence of submersible pumps and filters, aquarium placement in proximity to cooling sources, may require a higher wattage for proper control. The volumes indicated are approximate values corresponding to water temperatures up to 26°C/78°F with a room temperature of 20°C/68°F. If the ambient temperature is higher than the set temperature of at least 1°C/2°F, or external sources of heat elevate the aquarium temperature more than 1°C/2°F, the LCD display will remain red until conditions change
Description
Maintaining proper temperature is one of the most important factors in aquarium care. The Fluval E Heaters continuously monitor and display aquarium water temperature, ensuring the well-being of your aquarium inhabitants.
Simply the most technologically advanced submersible aquarium heaters available today, the Fluval E Series features VueTech technology. Its LCD display delivers peace of mind by continuously showing real time water temperatures. During normal operation the temperature display changes color if the aquarium water temperature varies from the pre-set temperature. Should external heat sources or other equipment cause the aquarium water temperature to rise or fall excessively the colored screen will flash, indicating a potential risk.
Product Features
- VueTech Technology for precision and safety- During normal operation the temperature readout will change color if the aquarium water varies +/-2 degrees F or more from the pre-set temperature. Should any external heat sources or other equipment, such as chillers, cause the aquarium water temperature to rise or fall beyond 5.5 °F, the colored screen will flash, indicating a potential risk. The ability to measure temperature in Celsius is also an option.
Precise temperature setting- With the easy to use adjustment lever, the temperature can be precisely set in 0.5° increments.
Advanced safety- The integrated fish guard offers advanced protection. Fish and invertebrates cannot come into direct contact with the heater core. The glass sleeve is also protected against shocks from large fish species.
Heater bracket- Built with a secure slim profile mounting bracket. The heater can be adjusted or removed without removing the mounting bracket. The great asset of the mounting bracket is its ability for you to mount the heater at varied angles, so you can view the front screen in any direction you wish. For those with a marine aquarium and sump, you can also attach the Fluval E heater there.
Digital micro-processor- Advanced micro-processor technology with dual temperature sensors provide accurate and real time water temperature readings.
The Fluval E series heater is available in four sizes:
50 Watts: Suitable for aquariums up to 15 gallons
100 Watts: Suitable for aquariums up to 30 gallons
200 Watts: Suitable for aquariums up to 65 gallons
300 Watts: Suitable for aquariums up to 100 gallons
A few key facts to know about your Fluval E Heater:
The temperature sensing technology is as precise as an external probe!
The internal Thermal Sensor samples the actual water temperature directly through the glass of the heater tube rather than the air temperature within the tube, as is the case with standard bi-metallic strip thermostats. Since the Thermal Sensor actually reads the true water temperature, it is more accurate and reliable than conventional bi-metallic heaters.
Advanced Electronic Circuitry, no moving parts to wear out!
Since the FLUVAL E heater has no bi-metallic points, there are no moving parts to arc, corrode or wear. The thermostatic control of the heater is separated from the water thermal sensor, different from conventional bi-metallic heaters, where the sensor is directly built into the thermostat. It is therefore less affected by extraneous factors.
Simple Installation Key Facts
-To ensure even and thorough distribution of warmed water and to provide an accurate temperature readings, the heater must be placed in close proximity to a source of water movement. Specifically, it should be placed at the rear of the aquarium, close to a filter or pumps water output. Water must at all times cover the heater at least up to the minimum water level indicated. Always maintain the water level in the aquarium to compensate for water loss due to evaporation. Note: A unique heater feature is its Low-Flow Indicator. If you see “LF” on your heater screen, this simply means that you need to place the heater in an area with more water circulation.(Refer to Instruction Manual for more information)
1. Position the heater in the aquarium (vertically or horizontally) and press suction cups firmly against glass, to adhere to the aquarium wall. If rear glass mounting is not possible, use the side glass mounting adapter.
2. Allow heater to acclimatize in the aquarium water temperature for 20 minutes before plugging it into the electrical outlet.
3. After 20 minutes, plug in the heater and set the degree scale if necessary.
4. At each Power-on, the E Heater goes through an initial self-test procedure during which it carries out a self-diagnosis to check internal circuitry and sensors operation, followed by a period to verify the surrounding conditions.
WARNING: The heater must never be operated outside of the aquarium. If the water level falls below the minimum water level MIN, the thermostat can no longer “read” the water temperature and therefore can no longer control the heating correctly. If it has to be taken out of the water or when transferring or changing the water, disconnect the heater from the power source and wait for at least 30 minutes to allow it to cool down.
Warranty Information:
Fluval E Series Heaters are guaranteed against defects in material or workmanship under normal aquarium usage and service for 5 years. We offer a 5 year guarantee on all non-replaceable parts which means that the heater will be repaired or replaced at the manufacturer’s discretion, free of charge, when the complete heater is returned with proof of purchase and postage paid. This warranty does not apply to any heater that has been subjected to misuse, negligence, or tampering.
Conclusion
By our suggestions above, we hope that you can found Lyons Whirlpool In Line Heater for you.Please don’t forget to share your experience by comment in this post. Thank you!
