Top 9 Narrow Vacuum Attachment

Feature

• [Remove LINT BUILD-UP] – Sealegend dryer vent cleaner kit removes lint that has accumulated for many years in the dryer vents, so your equipment runs more efficiently.
• [More than 28” long] – Flexible and handy vacuum hose attachments over 28inche in length allow for deep access to difficult places. Perfect for cleaning appliances that you can’t move.
• [SUCTION CONTROL] – Switch between 2 suction control settings to best suit your cleaning needs. Perfect for light cleanups and a heavy-duty power clean.
• [HELPS PREVENT FIRES] – Using Sealegend Lint Remover regularly to clean your dryer vent and help prevent deadly dryer vent fires from sparking.
• [Package Contains] – 1* Sealegend dryer vent cleaner kit

Feature

Feature

• Wide compatibility: Specially designed Shark Navigator Lift-Away vacuum cleaner, compatible with models NV350, NV352, NV355, NV356E. Replace part number 112FFJ.
• Corner Cleaning Tool: 14” Crevice tool is an extension tool for cleaning corners, e.g. furniture, floor, window gaps. Save your time.
• Dusting Brush: The replacement dust brush is made of high-quality soft brush, it can be rotate freely. To clean multiple places, e.g keyboards, lighting, furniture, etc.
• Premium Quality: Made of high-quality ABS plastic, durable and safe, easy to use. Perfectly fits Shark Navigator vacuums.
• Warranty: LANMU Provides 1-year warranty and friendly after-sale service to make sure the Risk-free shopping for you.

Feature

• Clean those hard-to-reach places like dryer vents, heating ducts, under furniture, along side the refrigerator, under kitchen appliances or heavy furniture
• It bends up to 180 degrees and provides a 24.4 inch reach
• 1-3/8”(35mm) to 1-1/4”(32mm) Hose Adapter, use 1-3/8-inch hose with 1-1/4inch attachments
• This kit fits both 32mm vacuum wand and 35mm vacuum wand.
• The kit is only for vacuums accepting 35mm or 32mm inner diameter attachents. Please measure and confirm your vacuum attachments inner diameter before purchasing.

Feature

• Made of High Quality material：25″ Long ,Flexible，fits all vacuums accepting 1 1/4″ (32mm) or 1-3/8″(32mm-35mm) inner diameter attachments.
• Crevice tool：Great for corner, heating ducts, under furniture, along side the refrigerator.
• Flexible bends up to 180 degrees: Don’t worry about trying to contort or bend to reach those spots.”Put the brush into hot water.Soak for a while,take out and drain off.The brush will get straight.”
• Easy to clean：If you want to wash, just rinse with water.
• The brush is TPR material.Good quality and long service life.

Feature

• Fits 1/4″ or 1-3/8″(32mm-35mm) Standard hose with Detachable Brush Head
• It has four simple parts,you can install them easliy by yourself.”Put the brush into hot water.Soak for a while,take out and drain off.The brush will get straight.”
• It is suitable for some narrow places that big brush can’t to clean,such as wardrobe corner,windowsill,sofa gap etc
• It is soft and can be bended.After bending,it can be restored.
• The brush is TPR material.Good quality and long service life

Feature

• Universal Micro Tool Kit
• Fits 1 1/4 inches friction-fit wands
• Fits all vacuums that accept standard 1 1/4 inch
• inside diameter attachments
• 35 mm adapter included for European sized friction-fit wands, Works With Miele Vacuums, Bosch, Sebo, Hoover, Eureka, Shark, Electrolux, Bissell, Dirt Devil, Fuller Brush and more.
• Does not fit any clip mounted wands like Dyson and Shark

Feature

• You will receive – one flexible 24 inch crevice tool cleaner and one long 28 inch brush
• VACUUM ATTACHMENT: 24″ Long – Inside measurement where your nozzle fits is 1 3/8 inches(35mm) and the tip width measures 0.6 inches(15mm) Fits vacuum hoses with a 1.25 inches or less diameter because of tapered end. ** Important – your vacuum hose needs to have a diameter of 1.25 or less to fit)** Does not fit Dyson ** See Description below for info on Shark Vacuum Cleaners. (measure the Shark vacuum hose to make sure it is 1.25 inches or less)
• Hose attachment is flexible but not flimsy – Has better airflow than others. Perfect vacuum attachment for under the fridge, dryer lint or hard to reach areas.
• Dryer lint brush is flexible – It is a 28 inch vent & coil cleaning tool designed specifically for reaching hard-to-clean areas like down in your lint trap.
• Both the hose attachment and the lint brush are flexible. If the weather is cold when you receive the crevice tool it may be a little stiff, as it warms to room temperature it will become flexible.

Feature

• Perfect vacuum attachment for cleaning out your dryer lint trap, under most appliances or hard to reach areas ( Measure the width of the areas you need to clean and make sure it is wider than 5/8 inches or 15 mm)
• ADAPTERS- 3 Adapters included. We had these designed to fit most standard vacuum hoses up to 1 3/4 inches. We called these the Worlds Greatest Adapters.
• CREVICE TOOL -Flexible but not flimsy – Has better airflow than others so you will have less clogging. If it feels stiff let it warm to room temperature when you receive it.
• Heavy duty, well-built hose out does the competition. NOT INTENDED FOR DYSON. We have another product for Dyson.
• You can use the crevice tool without the adapters if it fits or use one or all 3 adapters to make it fit your vacuum hose. The adapters will fit into each other to make a variety of connections. Just try one till it fits. The smallest size they will fit is 1 1/16 inches up to 1 3/4 inches.